• arlsair: auch mal was anderes :)

    kLOsi: die Berechnungen hat nix mit RoBa zu tun und es geht darum wenn die bitrate
    einen wert unterschreitet das batchcce die bitrate immer hochsetzt wenn man die RoBa methode anwendet

  • Es ist richtig, dass BatchCCE die Bitrate hochsetzt. Aber dies nur bei sehr kleinen durchschnittlichen Bitraten unterhalb von 500 kbps wird diese auf 500 kbps hochgesetzt. 4,2 Mbps ist davon weit entfernt.

    Gruß
    Arlsair

  • @ arlsair
    ja, werde meine einstellungen etw. editieren was sigs und so angeht.
    und

    @ll
    ich müsste noch nebenbei erwähnen das ich avisynth 2.0 habe, aus bestimmten gründen. spielts whl ne rolle.. ?

    ich habe mal einfach die vbr methode gewählt, wüsste nciht in wie fern diese schlechter sein sollte... ich lies heute morgen encodieren, komme von der schule wieder, er ist grad fertig geworden. nun ja, ich will natürlich weitermachen... mit scenaid erstelle ich das script, lade es in scenarist. beim laden kein prob, aber beim multiplexen kommen haufen fehler! als ich nach der anl. von arlsair vorgegangen bin, ist alles glatt mit authorist gelaufen und danach konnte scen alles ohne fragen und einsprüche muxen. nur das prob war halt dass output 5 gig groß wurde. jetzt nach dem scenaid das script fertig hatte und ich nun endlich auf erfolg gehofft hatte spuckt mir scenarist folgendes aus:

    Info
    Info Creating DVD Files
    Warning After the Cell<VTS2_Title14_PGC14_PG30_C_7><91>, the PGCI of PGC<VTS2_Title14_PGC14> strides 3rd sector.
    Warning After the Cell<VTS2_Title14_PGC14_PG31_C><92>, the PGCI of PGC<VTS2_Title14_PGC14> strides 3rd sector.
    Warning After the Cell<VTS2_Title14_PGC14_PG31_C_1><93>, the PGCI of PGC<VTS2_Title14_PGC14> strides 3rd sector.
    Warning After the Cell<VTS2_Title14_PGC14_PG32_C><94>, the PGCI of PGC<VTS2_Title14_PGC14> strides 3rd sector.
    Warning After the Cell<VTS2_Title14_PGC14_PG32_C_1><95>, the PGCI of PGC<VTS2_Title14_PGC14> strides 3rd sector.
    Warning After the Cell<VTS2_Title14_PGC14_PG32_C_2><96>, the PGCI of PGC<VTS2_Title14_PGC14> strides 3rd sector.
    Warning After the Cell<VTS2_Title14_PGC14_PG32_C_3><97>, the PGCI of PGC<VTS2_Title14_PGC14> strides 3rd sector.
    Warning After the Cell<VTS2_Title14_PGC14_PG32_C_4><98>, the PGCI of PGC<VTS2_Title14_PGC14> strides 3rd sector.
    Warning After the Cell<VTS2_Title14_PGC14_PG33_C><99>, the PGCI of PGC<VTS2_Title14_PGC14> strides 3rd sector.
    Warning After the Cell<VTS2_Title14_PGC14_PG33_C_1><100>, the PGCI of PGC<VTS2_Title14_PGC14> strides 3rd sector.
    Warning After the Cell<VTS2_Title14_PGC14_PG33_C_2><101>, the PGCI of PGC<VTS2_Title14_PGC14> strides 3rd sector.
    Warning After the Cell<VTS2_Title14_PGC14_PG33_C_3><102>, the PGCI of PGC<VTS2_Title14_PGC14> strides 3rd sector.
    Warning After the Cell<VTS2_Title14_PGC14_PG33_C_4><103>, the PGCI of PGC<VTS2_Title14_PGC14> strides 3rd sector.
    Warning After the Cell<VTS2_Title14_PGC14_PG33_C_5><104>, the PGCI of PGC<VTS2_Title14_PGC14> strides 3rd sector.
    Warning After the Cell<VTS2_Title14_PGC14_PG34_C><105>, the PGCI of PGC<VTS2_Title14_PGC14> strides 3rd sector.
    Warning After the Cell<VTS2_Title14_PGC14_PG35_C><106>, the PGCI of PGC<VTS2_Title14_PGC14> strides 3rd sector.
    Warning After the Cell<VTS2_Title14_PGC14_PG35_C_1><107>, the PGCI of PGC<VTS2_Title14_PGC14> strides 3rd sector.
    Warning After the Cell<VTS2_Title14_PGC14_PG35_C_2><108>, the PGCI of PGC<VTS2_Title14_PGC14> strides 3rd sector.
    Warning After the Cell<VTS2_Title14_PGC14_PG36_C><109>, the PGCI of PGC<VTS2_Title14_PGC14> strides 3rd sector.
    Warning After the Cell<VTS2_Title14_PGC14_PG36_C_1><110>, the PGCI of PGC<VTS2_Title14_PGC14> strides 3rd sector.
    Warning After the Cell<VTS2_Title14_PGC14_PG36_C_2><111>, the PGCI of PGC<VTS2_Title14_PGC14> strides 3rd sector.
    Warning After the Cell<VTS2_Title14_PGC14_PG36_C_3><112>, the PGCI of PGC<VTS2_Title14_PGC14> strides 3rd sector.
    Warning After the Cell<VTS2_Title14_PGC14_PG36_C_4><113>, the PGCI of PGC<VTS2_Title14_PGC14> strides 3rd sector.
    Warning After the Cell<VTS2_Title14_PGC14_PG37_C><114>, the PGCI of PGC<VTS2_Title14_PGC14> strides 3rd sector.
    Warning After the Cell<VTS2_Title14_PGC14_PG37_C_1><115>, the PGCI of PGC<VTS2_Title14_PGC14> strides 3rd sector.
    Warning After the Cell<VTS2_Title14_PGC14_PG38_C><116>, the PGCI of PGC<VTS2_Title14_PGC14> strides 3rd sector.
    Warning After the Cell<VTS2_Title15_PGC15_PG94_C><111>, the PGCI of PGC<VTS2_Title15_PGC15> strides 3rd sector.
    Warning After the Cell<VTS2_Title15_PGC15_PG95_C><112>, the PGCI of PGC<VTS2_Title15_PGC15> strides 3rd sector.
    Warning After the Cell<VTS2_Title15_PGC15_PG96_C><113>, the PGCI of PGC<VTS2_Title15_PGC15> strides 3rd sector.
    Warning After the Cell<VTS2_Title15_PGC15_PG97_C><114>, the PGCI of PGC<VTS2_Title15_PGC15> strides 3rd sector.
    Warning After the Cell<VTS2_Title15_PGC15_PG98_C><115>, the PGCI of PGC<VTS2_Title15_PGC15> strides 3rd sector.
    Warning After the Cell<VTS2_Title15_PGC15_PG99_C><116>, the PGCI of PGC<VTS2_Title15_PGC15> strides 3rd sector.
    Warning Some DVD players have problems with this limitation.
    Error The track<VTS02P03-no-cce> has place holder.
    Error The track<VTS02P04-no-cce> has place holder.
    Error The track<VTS02P05-no-cce> has place holder.
    Error The track<VTS02P16-no-cce> has place holder.
    Error The track<VTS02P17-no-cce> has place holder.
    Error The track<VTS02P18-no-cce> has place holder.
    Error The track<VTS03P01-no-cce> has place holder.
    Error The track<VTS03P04-no-cce> has place holder.
    Error The track<VTS03P07-no-cce> has place holder.
    Error The track<VTS03P08-no-cce> has place holder.
    Error PreCheck From DB failed
    Error DVD files could not be created

  • Zitat von Xell


    ich müsste noch nebenbei erwähnen das ich avisynth 2.0 habe, aus bestimmten gründen. spielts whl ne rolle.. ?


    Nein. Aber du handelts dir damit eine Menge Nachteile ein, z.B. kannst du nich DVD2AVIdg/MPEG2Dec3dg verwenden usw.

    Zitat von Xell


    nur das prob war halt dass output 5 gig groß wurde.


    Keine Ahnung.


    Wegen dem ersten Fehler habe ich mal im englischen Forum gesucht ohne Erfolg.
    Der zweite Fehler könnte vielleicht daher kommen, dass ScenAid (war zumindestens mal so, könnte mit der aktuellen Version schon behoben sein) alle Video-Daten, die nicht neukodiert werden (die dann ja mit dem Anhang -no-cce markiert sind) und damit die Endung .m2v haben, nicht erkennt wegen der Endung. Daher war es mal eine Lösung, die Endung in .mpv umzubennnen.

    Gruß
    Arlsair

  • ich wollte nicht sagen dass die bitrate berechnug was mit roba zu tun hat sondern dass die dif4u berechnung bzw die reauthorist berechnung bei mir immer zugetroffen hat

  • @ klosi kein wunder, hast auch recht
    ich habe scenaid einfach geschlssen und reauthorist gestartet, damit die scp erzeugt und voila scenarist hat viel länger importiert etc... vobs erstellt alles geht und auch mit gewünschter größe!

    neues problem: untertitel! wieso sehen sie so fett aus? kann man die nicht so einstellen, dass die wie beim originalfilm übertragen werden?

  • Zitat von arlsair

    Nein. Aber du handelts dir damit eine Menge Nachteile ein, z.B. kannst du nich DVD2AVIdg/MPEG2Dec3dg verwenden usw.


    Wie kann ich denn auswählen ob DVD2AVIdg/MPEG2Dec3dg verwendet wird? Es ist doch so, dass DVD2AVI und MPEG2Dec mit Dif4u installiert wird. Und da habe ich doch nur eine Version zur Verfügung.

    Gruß

    Thomas

  • Hallo,
    welche MPEG2Dec.dll du benutzt kannst du unter AVS Optionen beeinflussen.
    Ändere einfach die Pfadangaben und die dll-Bezeichnung.

    MfG
    Morpheus

  • Das ist schon klar, dass ich den weg der MPEG2Dec.dll beeinflussen kann. Aber es ist mir nicht bekannt, dass ich die Wahl zwischen DVD2AVIdg und DVD2AVI habe. Denn die Version ist doch von DIF4U vorgegeben, oder irre ich mich da? Und die MPEG2Dec3dg soll ich doch nur verwenden, wenn auch das d2v Projekt von DVD2AVIdg erstellt wurde.

    Gruß

    Thomas

  • Man kann einfach die DVD2AVIdg umbenennen und in den DoItFast4U! Ordner kopieren.

    Allerdings gibt es dann Probleme mit ReAuthorist, welche man aber mit D2VModify beheben kann. Oder man nimmt die Beta von DoItFast4U!, wo nun auch MPEG2Dec3dg/DVD2AVIdg integriert ist (hier hat die Wahl).

    Gruß
    Arlsair

  • Hi
    ich war leider in der letzten zeit etwas unpäslich und schreib das deshalb etwas spät:

    ich hab noch eine mögliche ursache für das bitrate problem für xell gefunden.
    roba solte mit batchcce 0.9.1.3 und bis cce version 2.67.00.11 immer funktionieren.
    Danach hab ich so gut wie keine fehler bis 2.67.00.23 feststellen können oder keine die man nicht irgendwie durch tricks beheben könnte. ab ecl 1.8 haben die da einige änderungen, bugfixes, etc gemacht so das, das mit batchcce nicht mehr so past
    es können einige änderungen per hand vorgenommen werden aber das hilft nicht um ein paar probs zu umgehen. bbwolf wolte zwar keine updates mehr bringen aber durch viele anfragen im eng. forum hat er ja jetzt die version 0.9.1.4 gestern released.
    Mal schaun ob da noch fehler auftreten und hoffen wir das bbwolf weiterhin daran arbeitet :)

    Hir auch ein thx an arlsair der aktiv mitgeholfen hat bbwolf auf
    sachen hinzuweisen die vielleicht verbessert gehörten. Mal schaun was sich tut. thx arlsair :)

    http://www.woofsoft.com/Downloads/70.aspx

    Der erste und letzte Punkt der change log solte für xell interesant sein:


    change log:

    * Changed the programming so that bitrates will be copied from the template only when a job is first loaded. If a job is already loaded and the template is changed it will keep the current bitrate.

    * Drop frame value in the ecl is now based on the frame rate of the source. Only 23.976 and 29.97 will be marked as drop_frame=1.

    * Added 'Mark all frames progressive during pulldown' option to the settings.

    * Added Debug log line showing which form of Top Field First info will be included in the ecl file.

    * The TFF/BFF issue corrected for all versions of CCE.

    * Changed the Luminance Level to 0 which corresponds with the proper YUV 16-235 setting in CCE. During installation the default for each template will be set to 0.

    * Added 'Use Cell Points File' option to the settings. If it's selected BatchCCEWS will look for the Cell Information file and if it exists will import chapter points from it. Defaults to true.

    * Added 'Auto Save Template Changes' option to the settings. If it's selected, when you click the Add/Replace Job button, settings will be saved to the template associated with the job.

    * Fixed the 'create_new_vaf' bug that was created by RB's fix to ECLCCE. A very good example of a cascading effect

Jetzt mitmachen!

Sie haben noch kein Benutzerkonto auf unserer Seite? Registrieren Sie sich kostenlos und nehmen Sie an unserer Community teil!