Beiträge von stax76

    [size=+1]0.9.9.2 (2006-05-01)[/size]

    Zitat
    • The x264 dialog has been reorganized.
    • The x264 switch '--bime' was added as 'B-Frames/Bidirectional ME'.
    • The x264 switch '--no-fast-pskip' was added as 'Analysis/No Fast P Skip'.
    • The x264 switch '--direct' was added as 'B-Frames/Direct Mode'.
    • Updated x264 to revision 516 using sharktooth's build.
    • DivX was updated to version 6.2.2.
    • Opening a audio source file that has a filename containing the language will cause StaxRip to pick up the language from the filename so it's no longer necessary to set the language manually.
    • Opening a source file while another source file is already open will show a dialog to select a template from. Previously just a warn message appeared asking to load a template first.
    • The options dialog has several new options allowing to disable certain assistant instructions. For now the following reminders can be disabled: crop, filters, cut and comp. check.
    • When StaxRip shows a dialog for the very first time it will automatically show the help of the dialog. It's now possible to disable this behavior in the settings.
    • For HDTV the image size is ofter larger then the monitor screen size, in that case StaxRip shows the crop dialog maximized fitting exactly the monintor size.
    • The command 'Perform/Clear Jobs' was added allowing to clear the job list.
    • The command 'Correct/ImageSize' was added. It changes the image size to the cropped image size in case no resize filter is used. This command is always performed after the crop dialog closes.
    • The command 'Correct/Crop Mod' was added. It crops until crop width and height is a multiple of 4 or in case no resize filter is used 16. This command is always performed after the crop dialog closes.
    • The command 'Perform/Add Job' was added allowing to add a job to the job list.
    • The command 'Perform/Run Jobs' was added allowing to start encoding the jobs.
    • The quality percent value that is used in conjunction with the compressibility check defaults now to 60% for XviD and DivX and 50% for x264. StaxRip will offer to reset all video encoder settings.
    • StaxRip no longer uses a default project but allows to specify which template to load at startup.
    • The main window supports now tooltips showed with a right-click or by using the 'What's this?' menu item (command: 'Help/What's This?'). StaxRip will offer to reset the main menu to make this menu item show up.
    • The automatic correction of crop values uses now two sides.
    • The crop dialog shows now mod values and labels in the status bar.
    • The menu editor uses now a menu instead of a drop down to select a command. The advantage of a menu is a hierarchical presentation and tooltip context help.
    • Added project option 'Advanced/Dangerous/Save Cropping' to disable forcing save mod values for cropping.
    • Updated the guides regarding multipass vs quality mode.
    • The size menu in the main window has new default values allowing to set the size/bitrate based on a quality of 40/50/60/70/80% which can be useful for codecs with multipass better tuned then quality mode. StaxRip will offer to reset this setting.
    • The audio settings for the PlayStation Portable were improved. StaxRip will offer to reset audio related settings.
    • The profile menus support now a tree structure based on slash signs ('/') in the profile name. StaxRip forces to reset audio and video encoder profiles to have new profile names.
    • The open files dialog supports now Drag & Drop to add files.
    • Open the target directory after the encoding was removed because windows explorer might crash for unknown reasons.
    • The dialog for opening source files has various new options for batch processing.
    • The PayPal donation link was broke due to changes from PayPal.
    • The 'More Guides' help document was updated with a italian guide.
    Zitat

    kann ich eigentlich die von StaxRip verwendete x264 Version 467 ohne Probleme durch die neueste 502 ersetzen? Und woher lädt StaxRip eigentlich die benötigten "External Applications"?

    Wenn keine Schalter entfernt oder geändert wurden, halte dass für unwahrscheinlich, sollte also keine Probleme machen. Aktuell verwendet StaxRip 490, hab das letzte build hier nicht angekündigt weil das Forum gerade down war.

    Ich hab von 5.1 keine Ahnung, du könntest in englischen Forum suchen, hatte damals im englischen Forum gelesen das dimzon's Plugin welches StaxRip ja benutzt solche Probleme beheben soll und zwar unabhängig von der Nero Version also am besten gleich in einen von dimzon's Threads nachfragen.

    Zitat

    Spiele momentan ein bisschen mit AAC Sound rum und habe das Problem, dass bei AAC 5.1 Encodierung die Kanäle anscheinend verkehrt encodiert werden. D.h. bei Wiedergabe auf einem PC mit Stereo-Lautsprechern habe ich nur die Effekte. Erst wenn ich in ffdshow die Kanäle hinten/vorne tausche, dann kann man die Filmchen nutzen.

    Liegt hier eventuell ein Problem bei StaxRip vor? Werden in den BeSweet-Einstellungen eventuell die Lautsprecherzuordnungen vertauscht?

    Ausserdem: Das Vertauschen von hinten/vorne ist ja nicht unbedingt das Gelbe vom Ei da dabei immer noch von 5.1 Lautsprechern ausgegangen wird. Das richtige wäre ein Downmixing, damit auch die Effekte von den "hinteren" Kanälen in den Stereosound gemixt werden. Mit welchem Decoder bekommt man das hin?

    Müsste man erforschen (kannst du englisch?), welche Nero Version?

    Zitat

    StaxRip macht es da nicht besser. Der musste dann auch noch 146:100 hinzufügen, was am Ende (zusammen mit 16:9) dann komplett falsch war (müsste es aber mal mit dem Hotfix probieren).

    Sollte ohne irgendetwas manuell einzustellen alles automatisch richtig erkannt werden.

    Zitat

    Was mir nicht einleuchtet ist, dass StaxRip nicht das exakte 16:11 verwendet.

    Weil StaxRip denn Wert grundsätzlich anhand des DAR's berechnet, hab so kompakten und einfachen Quelltext der auch für Auflösungen wie 480x576 funktioniert. Bei einem aktuellen build sollte man 48:33 bekommen was exakt 16:11 entspricht.

    Zitat

    Ist es möglich in einer der kommenden Versionen die Unterstützung für Radeon Karten der X1300 Serie und dessen AVIVO Feature für die GPU Video Komprimierung zu implementieren ?

    Nur wenn ATI irgendwelche Schnittstellen anbietet, gäbe es eine Kommandozeilen Schnittstelle, dann ließe sich StaxRip schon jetzt vom Benutzer mithilfe des Kommandozeilen Encoder dafür konfigurieren.

    MFC71.dll wird auch noch benötigt, wenn Recode installiert ist sollten alle 4 DLLs automatisch in den BeSweet Ordner kopiert werden. MFC71.dll wird eigentlich nur für Nero 7 gebraucht, StaxRip macht da aber kein Unterschied weil die ganz Sache auch so schon mega umständlich ist.

    Zitat

    Ich bin beim Encodieren verschiedener kleiner Clips auf ein neues Problem gestoßen. Wenn man im Projekt schneidet kommt es ab und an vor das die Enddatei den Zeitindex von der ungeschnittenen Originaldatei hat. Die EncoderOutput und das zu muxende Audiofile haben aber die korrekte Schnittlänge. Hab sie daher nochmal von Hand mit mkvmerge und VirtualDubMod gemuxt und wieder hatte der Filmclip den falschen Zeitindex. Nur ein komplettes Neuencodieren hat den Fehler behoben. Das Problem tritt nur sporadisch aller 4-5 Encodiervorgänge auf und ich konnte auch noch kein System dahinter erkennen. Der Container war immer MKV, Codecs Xvid und x264.

    Lässt sich leider nicht reproduzieren.

    bezüglich AR signaling, hab es jetzt so verbessert dass absolut *nichts* gemacht werden muss außer den resize Filter deaktivieren *bevor* man eine Quelldatei öffnet. Es sollte alles automatisch eingestellt werden.

    *Wenn kein resize Filter aktiv ist verwendet auto crop jetzt mod 16 und beim schließen des Trimmendialogs wird ebenfalls mod 16 erzwungen. Mit resize Filter also immer mod 4 und ohne mod 16 beim Trimmen.

    *Auto resize verwendet wenn kein resize Filter aktiv ist jetzt die Werte die sich nach dem Trimmen ergeben da resize ohne resize Filter ja keinen Sinn macht.

    *mkvmerge verwendet kein title mehr.

    *Für die PAR Berechnung ist Y jetzt 33.

    http://www.planetdvb.net/staxrip/StaxRip_Hotfix.zip

    Zitat

    Wo kann ich in Staxrip die Parameter für mkvmerge ändern? Mich stört das der Titel immer nach der ersten Vob Datei benannt wird.

    Kann man leider nicht einstellen, es sollte der Name der Zieldatei verwended werden, eigentlich keine gute Lösung da man einen anständigen Namen oft erst nach dem Erstellen wählt.