Beiträge von Darklistener

    D3s7 hat ScenAid 1.7 released

    ScenAid hat jetzt einen VIP bereich wie Numenu4u

    Changelog:

    Fix:
    Error 13 in GenerateTrack
    Fix causing redundant names in the Scenarist Script
    Fix causing Error 6 in ProcessAssets
    Error 5 in BuildChapterLayout corrected

    Additons:
    VIP Mode (A donation of $15.00 or more will get you added to the VIP list - or if you feel you in the past have added to the development of Scenaid, feel free to email me and if I agree you will be added)

    Muxman Script generation (VIP) - full support for muxman 15 or later
    Muxman SUP support (VIP) - creation of .SUP files from the original subtitles allowing for exact reproduction of subtitles
    Muxman Automation (VIP) - full automation now functions in Muxman mode including IFOUpdate routines (BatchIfoUpdate is no longer required) and Sector check

    Changes:
    Ability to force dummy of audio in a vip demux has been improved
    Audio dummy checks have been improved which should avoid issues with odd named files/directories
    IFO Parsing routine updated to allow for scripting of pre/post commands even in dummy PGC's (no PG's)
    IFO Parsing routine updated to allow for poorly authored IFO's with improper information in the tables


    More changes to come

    Zeul hat Numenu4u 2.0.17 released

    Changelog:

    Fix: Thanks to Trahald a bug came to light in the VIDEO_TS.IFO updating
    Fix: A correction to a specific VMI command, that was dropping the conditional argument
    Moved the ‘Use Original Assets’ setting from General Settings to Encoder – Makes more sense
    Please Update to this build to correct the IFO routines

    Zeul hat Numenu4u 2.0.16 released

    Changelog:

    • Fix: When there are more than 600 vobs Scenarist would fail, so a check is made for this, but, this VTS was still called in the UpdateMPV routine causing the error reported by wfn1. NB this restriction doesn’t affect VIP users who have Muxman available
    • When the Copy File setting is set to copy all remaining files (for complete DVD folder or ReBuilder use), then the VTS sector information is now updated automatically.
    • Added the ability to resize the VOB preview window (This may correct any directx problems – unsure but worth a try)
    • Fix: Broke a scripting part in the previous release for muxman
    • Noticed a GUI error when manual pausing of Scenarist initiated
    • Added the ability to generate an ISO image. IF the re-authored menu + the original title VOBs are less than 4.3GB then the original title VOBS will be copied over and an ISO created. If DIF4U is in control it will be shut down. This is a VIP option only.
    • Finally added the help menu. There are multiple links to the correct part of the Help menu, through each screen
    • A couple of corrections to the Wizard
    • Fix: On some occasions the entire AVS script would not be written – caused an error in the Preview Window
    • In the Preview Window, the entire size of the DVD is now shown. Altering the menu bitrate here shows the direct effect on the overall size.

    Zeul hat Numenu4u 2.0.14d released VIPs only

    Changelog:

    Corrects a couple of bugs that were found by Pike007. Also added a couple of new VIP options regarding autoselect.

    The full changelog now reads:

    27/06/05

    * Fix: If the path to Quenc has spaces in it would fail
    * Fix: Discovered that NuMenu was still attempting to re-encode video streams diagnosed/manually selected as dummy, or files that didn’t meet the encoding threshold – this could have caused an error
    * Fix: A PGC link to VMG PGC1 would have caused a muxman error due to a script error
    * For VIP users added 6 new options
    o Replace button command if the button links to a PGC/PG/CELL that has been stripped. If the button is pressed then the cell will repeat
    o Remove button if the button links to a PGC/PG/CELL that has been stripped.
    o NB In some cases, the button linkage cannot be resolved, if the button works by altering the GPRM values and these are not checked in the linked PGC. NuMenu will check the GPRM values in the linked PGC to see if the common ‘if ( GPRM==….), LINKPGCN etc exists, In this case the linked PGC can be resolved so the button can be removed.
    o Added a Scenaid compatability mode J. This will output an appropriate mxp file but won’t actually mux. A future build of Scenaid will use this to create a full mxp file for Muxman that will then re-create the entire DVD
    o Enhanced the asset removal, so you can now choose to automatically remove all video streams that are not menu screens. This is separated into the VMG and VTS area. In the VMG, non-menu screens are normally warnings etc, in the VTS they are normally intros into menu pages or transitions between menu pages
    o Option to automatically load the VMG and/or every VTS on loadup regardless of size

    * Major enhancement for VIP users: When in the VOB preview screen, the buttons for each menu are now shown. Left clicking the button banner (you’ll see), will change the button color outline to green – this button has now been REMOVED -> Left click to reinstate it. Right clicking will make the button outline majenta – this button has now been forced to AUTO ACTION. Right click again to reinstate the FORMER state (active or removed) This can work in conjunction with the above options. If for example you remove a menu, but forget to remove a button that links to that menu, NuMenu will try to fix this for you. Also, when in this screen, there is now a button that will use the original assets instead of re-encoding (perhaps enough material is being removed that re-encoding the remainder is now not necessary)

    * Fix: When checking the 2nd or 3rd sub stream for compliancy (so the subs = substream1), EnableStop wasn’t being set in some cases. This would cause lots of sub errors in scenarist
    * Fix: The cell still time was still being set in Scenarist is an asset had been dummied. It is now set to 0.
    * Settings are now saved when the ‘start’ button is pressed instead of at the end (in case of failure)
    * Script alteration to reflect the changes made in Muxman 0.15a
    * Option to automatically select ALL assets in a format conversion, regardless of menu size

    P.S.:
    Die 2.0.14er Versionen wenn ich das richtig mitbekommen hab is ne Beta Version wo vieles dazukommt vorallem VIP only sachen und als Beta nochn haufen Bugs hat und wenn das mal Stabel is auch ne Public Version wider rauskommt

    Zeul hat Numenu4u 2.0.14 released VIPs only

    Changelog:


    * Fix: If the path to Quenc has spaces in it would fail
    * Fix: Discovered that NuMenu was still attempting to re-encode video streams diagnosed/manually selected as dummy, or files that didn’t meet the encoding threshold – this could have caused an error
    * Fix: A PGC link to VMG PGC1 would have caused a muxman error
    * For VIP users added 5 new options
    o Replace button command if the button links to a PGC/PG/CELL that has been stripped. If the button is pressed then the cell will repeat
    o Remove button if the button links to a PGC/PG/CELL that has been stripped.
    o NB In some cases, the button linkage cannot be resolved, if the button works by altering the GPRM values and these are not checked in the linked PGC. NuMenu will check the GPRM values in the linked PGC to see if the common ‘if ( GPRM==….), LINKPGCN etc exists, In this case the linked PGC can be resolved so the button can be removed.
    o Added a Scenaid compatability mode J. This will output an appropriate mxp file but won’t actually mux. A future build of Scenaid will use this to create a full mxp file for Muxman that will then re-create the entire DVD
    o Enhanced the asset removal, so you can now choose to automatically remove all video streams that are not menu screens. This is separated into the VMG and VTS area. In the VMG, non-menu screens are normally warnings etc, in the VTS they are normally intros into menu pages or transitions between menu pages

    * Major enhancement for VIP users: When in the VOB preview screen, the buttons for each menu are now shown. Left clicking the button banner (you’ll see), will change the button color outline to green – this button has now been REMOVED -> Left click to reinstate it. Right clicking will make the button outline majenta – this button has now been forced to AUTO ACTION. Right click again to reinstate the FORMER state (active or removed) This can work in conjunction with the above options. If for example you remove a menu, but forget to remove a button that links to that menu, NuMenu will try to fix this for you. Also, when in this screen, there is now a button that will use the original assets instead of re-encoding (perhaps enough material is being removed that re-encoding the remainder is now not necessary)

    * Fix: When checking the 2nd or 3rd sub stream for compliancy (so the subs = substream1), EnableStop wasn’t being set in some cases. This would cause lots of sub errors in scenarist
    * Fix: The cell still time was still being set in Scenarist is an asset had been dummied. It is now set to 0.

    Known Issue: If the 1st substream is set for PAN-SCAN then the button may look slightly misaligned, but it won't affect the useage.

    Hi
    Ich hatte bei meinem letzten projekt 2 mpegs die bereits konform waren.
    Sie werden demultiplext, dann wurde gesagt Audiobitrate stimmt und wider multiplext.
    Is das nötig? Kann man die schritte dann nicht auslassen und das mpeg einfach in den Arbeitsortner kopieren lassen?

    PgcEdit 0.6.0beta7 released

    Changelog:

    A. = Added feature
    R. = Removed
    E. = Enhancement
    F. = Fixed bug

    0.6.0beta7 (June 18, 2005)
    F. Fixed a bug when compilation size > DVD-9 size.
    E. The angle cells are now removed from the list of valid cells for the layer
    break.
    E. Added two fields in the Burn Setup dialog to type the default size of the
    single layer DVDs and the DL DVDs. An "Use" button has also been added.
    The top frame of the Burn dialog lists also the DVD and DL-DVD capacities.
    The output of the Check DVD+/-R size function has also been modified.
    F. Fixed some bugs in the Find All function: the line number (when the target
    was a pre, post or cell command) and the cell number (when the target was
    a button or BOV) were off by 1, and the button group was not always
    correctly displayed. The GUI has been changed also to avoid the Tcl/Tk
    limitaiton of the number of occurences that can be displayed in a canvas.

    0.6.0beta5 (June 13, 2005)
    A. Added button "Seamless cell" in the burn DL-DVD GUI, to clear old layer
    break flags.

    0.6.0beta4 (June 12, 2005)
    A. Added shortcut Control+P to launch the PGC Preview.
    F. Fixed a bug in the calculation of the number of padding sectors when the
    selected cell's original LBA was < compilation size / 2.
    E. Some improvments in the burn DL interface.

    0.6.0beta3 (June 10, 2005)
    F. Fixed a bug in the calculation of the minimum sector value for the LB.

    0.6.0beta2 (June 8, 2005)
    R. Removed the original link to DVD Decrypter's homepage in the Burn Setup
    dialog because this page is discontinued, and may be monitored by a major
    DVD company. Replaced by a direct download link at Doom9.

    F. Two big bugs fixed in the Burn DL routine. Should work now!
    E. If the option to burn with DVDD is ON, the number of sectors in L0 is set
    automatically in the setups of DVD Decrypter, via the registry.

    0.6.0beta1 (June 6, 2005)
    A. The Burn function (under Windows only) is now able to burn Dual Layer
    DVD-9s. Added a GUI to retrieve the Layer Break cell. Note: You MUST
    burn the ISO with DVD-Decrypter or a burner that honor the LB placement!
    E. Added an option to change the default listbox background color to white
    under X11 (Linux, and Mac with Tk-X11).
    E. Menu Editor: Changed the menu labels Buttons -> Align vertically and Align
    horizontally to Align on same column and Align on same row.

    BatchCCEWS 0.9.1.6c Unstable released

    Trahald & Des7 haben beschlossen BatchCCEWS weiterzuführen nachdem WoofSoft nicht mehr weitermachen wollte und dann plötzlich verschwand.

    Auf der SorceForge Seite gibts nur die neue .exe die ihr über die alte von BatchCCEWS 0.9.1.5 kopieren müst.

    Changelog:

    Things added so far to 0.9.1.6 so far
    - HCENC support. does segmented coding to set proper chapters. HANK315 is planning internal chapter setting support so that will not be necessary in the future. Other encoders may be added later. CCEFRONT support is comming sometime next week.
    - Fixed internal chapter setting with some help from d3s7 (drop frame is applied correctly to the chapters from the decrypted chapter file) this is only needed when cce-data.txt is used, scenaids cce-data.txt always imports chapters properly.
    - Fixed - pressing the convert chapters to film. it would convert the chapter times the wrong way. (the initial setting was correct, it was only an issue if the chapter to film setting was changed after import)
    - Option was added for using the existing vif. Also Max gop option(sets max m n/m size for the encoding ntsc-film/pal/ntsc. Pan and scan option added.
    - Added CCE 2.7x support.. Allows for a manual setting of a cce path for versions such as 2.7x that dont require eclcce.
    - Im sure other stuff....


    P.S.:

    Original Post vom Eng. Forum

    Die WoofSoft page is schon des längeren down

    Mein Testdurchlauf mit CCE 2.7x hat gut funktioniert