Beiträge von lanius
-
-
Zitat von nimbus
.... probleme bei der richtigen einstellung des xvid codecs ....
Da gibt es doch schon ;DEinmal von BrotherJohn
http://forum.gleitz.info/showpost.php?p=110912&postcount=1oder von
Selur
http://www.flaskmpeg.info/board/thread.php?sid=&postid=46975Das solte dir weiterhelfen
-
Hm :hm: jetzt bei mir auch wieder wer weis woran das mal wieder liegen mag. :zunge:
-
Kann es sein das es wieder down ist ???
-
Version 1.4.8 beta 7
Zitat
Version 1.4.8 beta 6
* A new option under the file menu was added: Demux Audio Only. This is intended for demuxing the audio from streams that do not contain video.* Fixed the Teletext detection issue.
* Fixed automatic PID detection under CLI.
Zitat
Version 1.4.8 beta 7
Sorry for the rapid fire betas, but you don't want me to sit on my hands, do you?* The trackbar is now updated and the Stop (ESC) function works during "Demux Audio Only".
-
HCencoder 0.18
New release of HC.
Change log:
- Updated encoding engine
- Added pulldown 23.976fps --> 29.97fps
- Added adaptive matrix
- GUI bug fixes
-
DVD Rebuilder 0.97 free ist raus.
Zitat
uses up-to-date versions of supporting software (HC 0.17, EclPro 0.52, ReJig 0.5f), should be faster when ReJig is used and it fixes a number of bugs. -
version 2.27 is out!
Zitat
- fixed compatibility with DivX 6.1.x
- quality based mode respects DXN HT profiles when DivX 6.1.x is used
- XviD 1.2 SMP build of 28/02/06 is bundled
- DGIndex 1.4.6 is bundled
- ColorMatrix.dll is updated to version 1.10 -
VobBlanker 2.1.1 Beta 4
Zitat
Changelog- Changed: VobBlanker now skips the pack instead of abort when find a wrong pack in replacing PGC/Cells.
- BugFix: ILV material was not well reported in PGC list and Cell list
-
Zitat von mad-eddy
Nööööö. Alles gut bei mir.
Sach mal... Hast du die .Exe auch in das Installations-Verzeichnis von ImgToolBurn geschoben??:ani_lol: Edit: Neeeee, haste nicht! Du hast die letzte Final gar nicht installiert. Ich habs grad mal probiert, du brauchst die Sprachdatei(en) dazu. Also erstmal die Version 1.2.1 installieren. Sorry. Ehrlich. Ich finds aber zum schiessen.
Gruss
Nö ;D einfach entpackt und gestartet. Is ja doof wenn nicht alles dabei ist :ani_lol:
-
Hi zusammen,
ich habe es mir gerade rntergeladen entpackt und dann gestartet :hm:
Habt ihr euch schonmal das Ergebnis angeschaut Also bei mir fehlt jegliche Schrift in dem Tool als wäre es nicht ganz vollständig.
Ist das bei euch auch so :hm:
-
VobBlanker 2.1.1 Beta 2
Zitat
Changelog:
B2- Added: Re-run is now allowed without reload the project if "Use input folder" was not checked. I've kept all the internal vars unchanged (I hope), so the re-run should work fine
- BugFix: Combinations of Reusing Language Units and deleting/blanking the reused LUs did not work well
- BugFix: Default of Autostart Tiny changed to False was not done in more settings dialog
-
DVD-RB 1.07.1 Pro ist raus!
Zitat
The following changes were made for this update:- IMPORTANT BUG FIX: Corrected an error in the Menu Encoding module in which some menus may be encoded without audio.
- IMPORTANT BUG FIX: Corrected an error in which the encoding process can "hang" while doing an ILVU segment.
- Modified OPV maximum bitrate calculation during the prediction phase in order to prevent possible "OPV VBV ovf" errors.
- Updated the Installer to use a version of ECLPRO that supports multiple instances.
- Corrected iDCT "64-Bit SSE2MMX" to "32-Bit SSE2MMX"
- Fixed an error in which he HalfD1 checkmark was not properly resetting upon new source load.
-
HCencoder 0.17
Zitat
New release of HC.Change log:
- more options for CQ encoding
- added gop, frames and chapter command as parameters for HCenc
- create a chapter list based on scene changes
- frame count starts at 0
- GUI bug fixes
- frame serving bug fixed
- memory error bug fixed (I hope...)Danke an hank315
-
DGMPGDec 1.4.6 Release Candidate 1
ZitatThis version fixes the truncation of the last few bytes of demuxed M2V files.
Quelle : http://forum.doom9.org/showthread.php?p=775778#post775778
-
DVD-RB 1.06.1 Pro ist raus.
Zitat
Changes:- In order to facilitate the changed iDCT options
of DGDECODE v1.4.5, the iDCT selection table is
now changed depending upon the version selected.- Updated the skins to reflect newer button format
on the [Blockierte Grafik: http://technik.movie2digital.de/alink.gif] CCE Settings dialog.- Added the selected reduction percentage to the
"Steal Space from Extras is enabled" line that
is displayed and logged.- Corrected a bug in which certain parameters were
not being loaded correctly when starting by
double-clicking on a .RBP file.- Fixed a bug related to field order detection and
encoding introduced in v1.06 in which a specific
set of (unusual) circumstances might cause the
order to be incorrectly detected.- Updated routines to take advantage of newer [Blockierte Grafik: http://technik.movie2digital.de/alink.gif] CCE
abilities (v2.69 and greater) to output bottom
field first (BFF) [Blockierte Grafik: http://technik.movie2digital.de/alink.gif] interlaced streams. Now when
the original stream is BFF -- the new stream can
retain this characteristic.- Enhanced the REBUILD engine so it will now accept
field based picture structures. This might
improve ProCoder encoding of [Blockierte Grafik: http://technik.movie2digital.de/alink.gif] interlaced streams
(if enabled). It will also stop Error #0006 when
using ReJig or "No Compression" on streams that
use that structure.- Fixed the "BlankText" INI parameter so it will
work with Half-D1 sources that are being blanked. -
PgcEdit 0.6.3beta8 ist raus
-
DGMPGDec Version 1.4.6 Beta 3
Zitat
* Changed DGIndex/DGDecode so that when DGDecode sets the frame rate
in Avisynth, it uses the exact fractional representation for
fps_numerator/fps_denominator (changes by 'tritical').
This way, e.g., NTSC clips get the exact 24000/1001, 30000/1001, or
60000/1001 rate instead of 23.976, 29.970, or 59.94.
DGIndex was actually getting the framerate correct, but when it wrote the
d2v file, it would multiply the floating point value up by 1000 and then save
it. Then DGDecode would use that value for the numerator and 1000 for the
denominator. Now, when DGIndex gets the fps value from the lookup table it
also gets numerator/denominator values from a lookup table. Then in the d2v
file it writes, e.g.:
Frame_Rate=29970 (30000,1001)
with numerator and denominator in parentheses. DGDecode then uses those
values when setting the frame rate in Avisynth.
This change bumps the D2V file format version number to 13.
* The message box that pops up for transport streams when no data is
found has been clarified to direct the user to use the Stream menu to set
the PIDs.
* Fixed a hang when the CLI -HIDE option is used and the input file cannot
be opened.
* The video overlay is now not claimed when the -HIDE or -MINIMIZE CLI
options are used.
* File version properties were added for DGIndex, DGDecode, and DGVfapi.
If you right click on the EXE, DLL, or VFP files and select properties, you can
now obtain file version information.
* The DGIndex Information dialog now shows an overall average bitrate for
the entire previewed video in addition to the windowed value. The windowed
value now reports every 32 frames instead of every 64 frames. -
version 2.26 is out!
Zitat
- fixed bug in handling 60fps FILM sources
- fixed bug when minimum width setting was not respected in some cases
- fixed bug in persisting "No Audio/No subs" options for consequent opened files
- fixed "help" link on about window
- fixed bug when AutoGK goes into loop of error message if no XviD is found and DivX version is unsupported
- GREATLY improved speed of analysis step for AVI input sources
- "Unknown language" label is no longer put into AVI audio stream comments
- fixed "cartoon" hidden option propagation for latest XviD
- added support for all DivX versions starting with 6.0.3 build 1697 (plain 6.0.0 is no longer supported)
- updated french and portuguese tutorials
- DGIndex is updated to version 1.4.5
- avisynth is updated to version 2.5.6a
- lame is updated to version 3.97b2
- XviD 1.1 build of 09/12/05 is bundled
- version 2.26 fixed undersized files with latest XviD and 2.25 - use only XviD bundled! -
Es gibt eine neue Version Yamb-1.3.1_20051104 probier die mal aus. ;D