; HeadAC3he INI File

INIVersion       = 10

; Usually the digits mean:
; 0 - Disable
; 1 - Enable

; If an option is left blank, a hardcoded default will be used.

; DON'T change the order of the options!


; Error-details
; 0 - show everything
; 1 - skip infos, but show warnings
; 2 - show only critical errors
; 3 - show nothing (not recommended!)
ErrorDetail      = 0

; Start the process automatically/manually? Quit the program automatically/manually?
; 0 - manual start and end
; 1 - auto start, manual end
; 2 - manual start, auto end
; 3 - auto start and end
StartEnd         = 0

; Ask "Do you want to quit?"
; StartEnd>1 overrides this setting
ConfirmExit      = 1


SourFile         = C:\The Pump.mp3

; leave blank for automatic operation or set value in ms (max/min +/-32000)
SourDelay        = 0

; If DestFile is left blank, a name will be generated using SourFile
DestFile         = C:\The Pump.ac3

; 0 - Source
; 1 - AC3-WAV
; 2 - WAV
; 3 - MP3
; 4 - Vorbis
; 5 - MP2
; 6 - AC3
; 7 - AAC
DestFormat       = 6

; Specify bits per sample
; 2 - 16
; 3 - 24
; 4 - 32
WAVBits          = 4

; Specify WAV format
; 0 - int
; 1 - float
WAVFormat        = 1

; Specify 2pass mode
; 0 - none
; 1 - dumb
; 2 - hybrid
; 3 - float
TwoPassMode      = 1

; Values from 1 to 100 allowed
NormalizeTo      = 100


StartFrame       = 
EndFrame         = 


; Use Boost Function?
UseBooster       = 0
; Types 0->3 available
BoostType        = 0
; muliply desired values by 100
; allowed  ranges are 1->999 resp. 0->100
BoostValue       = 140
BoostStrength    = 100


; Reading block size for every undefined drive
; Put in the number of 2^x Bytes:
; eg: 13 -  8KB
;     15 - 32KB
; Maximum is 23 (=8192KB)
BlockSizeGlobal  = 14

; Reading block size for every defined drive
; format: drive:blocksize and use , as seperator
; eg: C:12,D:15 or leave blank
BlockSizeDrive   = 

; Same applies for write block settings
WBlockSizeGlobal = 18
WBlockSizeDrive  = 

; Specify minimum and maximum buffer in MB
; Minimum is 10
MinBuffer        =  10
; Maximum buffer has higher priority then minimum
; 0 - unlimited
MaxBuffer        = 128

; Specify priority for main and transfer thread (0 - idle -> 6 critical)
PriorityCPU      = 3
PriorityIO       = 2

; Specify *relative* I/O priority when PCM data is written
; eg. 2 means two steps lower then PriorityIO)
PCMRelPrioIO     = 1


; 0 - nothing
; 1 - Azid Configuration
; 2 - MP2enc/Lame/Vorbis Configuration
ShowOptions      = 1

; Show the Log window?
ShowLog          = 1


; Azid Defaults:

; set to less than -2db (min is -127) to prevent clipping with wrongly(?) mastered ac3s
AzidGainCorrect  =-2

; Current Preset

; Select input channels
InLeft           = 1
InCenter         = 1
InRight          = 1
InRearLeft       = 1
InRearRight      = 1
InLFE            = 1

; Input channel gain (-60db to 60db)
InLeftGain       =   0
InCenterGain     =   0
InRightGain      =   0
InRearLeftGain   =   0
InRearRightGain  =   0
InLFEGain        =   0

; Input channel DRC
; 0 - none
; 1 - light
; 2 - normal
; 3 - heavy
; 4 - inverse
InLeftDRC        = 0
InCenterDRC      = 0
InRightDRC       = 0
InRearLeftDRC    = 0
InRearRightDRC   = 0
InLFEDRC         = 0

; Select output channels
OutLeft          = 1
OutCenter        = 1
OutRight         = 1
OutRearLeft      = 1
OutRearRight     = 1
OutLFE           = 1

; Output channel gain (-60db to 60db)
OutLeftGain      =   0
OutCenterGain    =   0
OutRightGain     =   0
OutRearLeftGain  =   0
OutRearRightGain =   0
OutLFEGain       =   0

; Output channel DRC
; 0 - none
; 1 - light
; 2 - normal
; 3 - heavy
; 4 - inverse
OutLeftDRC       = 0
OutCenterDRC     = 0
OutRightDRC      = 0
OutRearLeftDRC   = 0
OutRearRightDRC  = 0
OutLFEDRC        = 0

; global gain, needed for one pass mode (-120db to 120db)
GlobalGain       =    0

; 0 - Mono
; 1 - Surround
; 2 - Stereo
; 3 - Surround 2
DownmixType      = 1

; Use 7kHz low-pass for rear channels?
LowPassFilter    = 0


; 2Ch Preset

; Select input channels
2ChInLeft           = 1
2ChInCenter         = 1
2ChInRight          = 1
2ChInRearLeft       = 1
2ChInRearRight      = 1
2ChInLFE            = 1

; Input channel gain (-60db to 60db)
2ChInLeftGain       =   0
2ChInCenterGain     =  -3
2ChInRightGain      =   0
2ChInRearLeftGain   =  -3
2ChInRearRightGain  =  -3
2ChInLFEGain        =  -3

; Input channel DRC
; 0 - none
; 1 - light
; 2 - normal
; 3 - heavy
; 4 - inverse
2ChInLeftDRC        = 0
2ChInCenterDRC      = 0
2ChInRightDRC       = 0
2ChInRearLeftDRC    = 0
2ChInRearRightDRC   = 0
2ChInLFEDRC         = 0

; Select output channels
2ChOutLeft          = 1
2ChOutCenter        = 0
2ChOutRight         = 1
2ChOutRearLeft      = 0
2ChOutRearRight     = 0
2ChOutLFE           = 0

; Output channel gain (-60db to 60db)
2ChOutLeftGain      =   0
2ChOutCenterGain    =   0
2ChOutRightGain     =   0
2ChOutRearLeftGain  =   0
2ChOutRearRightGain =   0
2ChOutLFEGain       =   0

; Output channel DRC
; 0 - none
; 1 - light
; 2 - normal
; 3 - heavy
; 4 - inverse
2ChOutLeftDRC       = 2
2ChOutCenterDRC     = 0
2ChOutRightDRC      = 2
2ChOutRearLeftDRC   = 0
2ChOutRearRightDRC  = 0
2ChOutLFEDRC        = 0

; global gain, needed for one pass mode (-120db to 120db)
2ChGlobalGain       =    0

; 0 - Mono
; 1 - Surround
; 2 - Stereo
; 3 - Surround 2
2ChDownmixType      = 3

; Use 7kHz low-pass for rear channels?
2ChLowPassFilter    = 0


; 4Ch Preset

; Select input channels
4ChInLeft           = 1
4ChInCenter         = 1
4ChInRight          = 1
4ChInRearLeft       = 1
4ChInRearRight      = 1
4ChInLFE            = 1

; Input channel gain (-60db to 60db)
4ChInLeftGain       =   0
4ChInCenterGain     =  -3
4ChInRightGain      =   0
4ChInRearLeftGain   =   0
4ChInRearRightGain  =   0
4ChInLFEGain        =  -3

; Input channel DRC
; 0 - none
; 1 - light
; 2 - normal
; 3 - heavy
; 4 - inverse
4ChInLeftDRC        = 0
4ChInCenterDRC      = 0
4ChInRightDRC       = 0
4ChInRearLeftDRC    = 0
4ChInRearRightDRC   = 0
4ChInLFEDRC         = 0

; Select output channels
4ChOutLeft          = 1
4ChOutCenter        = 0
4ChOutRight         = 1
4ChOutRearLeft      = 1
4ChOutRearRight     = 1
4ChOutLFE           = 0

; Output channel gain (-60db to 60db)
4ChOutLeftGain      =   0
4ChOutCenterGain    =   0
4ChOutRightGain     =   0
4ChOutRearLeftGain  =   0
4ChOutRearRightGain =   0
4ChOutLFEGain       =   0

; Output channel DRC
; 0 - none
; 1 - light
; 2 - normal
; 3 - heavy
; 4 - inverse
4ChOutLeftDRC       = 1
4ChOutCenterDRC     = 0
4ChOutRightDRC      = 1
4ChOutRearLeftDRC   = 1
4ChOutRearRightDRC  = 1
4ChOutLFEDRC        = 0

; global gain, needed for one pass mode (-120db to 120db)
4ChGlobalGain       =    0

; 0 - Mono
; 1 - Surround
; 2 - Stereo
; 3 - Surround 2
4ChDownmixType      = 1

; Use 7kHz low-pass for rear channels?
4ChLowPassFilter    = 0


; 6Ch Preset

; Select input channels
6ChInLeft           = 1
6ChInCenter         = 1
6ChInRight          = 1
6ChInRearLeft       = 1
6ChInRearRight      = 1
6ChInLFE            = 1

; Input channel gain (-60db to 60db)
6ChInLeftGain       =   0
6ChInCenterGain     =   0
6ChInRightGain      =   0
6ChInRearLeftGain   =   0
6ChInRearRightGain  =   0
6ChInLFEGain        =   0

; Input channel DRC
; 0 - none
; 1 - light
; 2 - normal
; 3 - heavy
; 4 - inverse
6ChInLeftDRC        = 0
6ChInCenterDRC      = 0
6ChInRightDRC       = 0
6ChInRearLeftDRC    = 0
6ChInRearRightDRC   = 0
6ChInLFEDRC         = 0

; Select output channels
6ChOutLeft          = 1
6ChOutCenter        = 1
6ChOutRight         = 1
6ChOutRearLeft      = 1
6ChOutRearRight     = 1
6ChOutLFE           = 1

; Output channel gain (-60db to 60db)
6ChOutLeftGain      =   0
6ChOutCenterGain    =   0
6ChOutRightGain     =   0
6ChOutRearLeftGain  =   0
6ChOutRearRightGain =   0
6ChOutLFEGain       =   0

; Output channel DRC
; 0 - none
; 1 - light
; 2 - normal
; 3 - heavy
; 4 - inverse
6ChOutLeftDRC       = 0
6ChOutCenterDRC     = 0
6ChOutRightDRC      = 0
6ChOutRearLeftDRC   = 0
6ChOutRearRightDRC  = 0
6ChOutLFEDRC        = 0

; global gain, needed for one pass mode (-120db to 120db)
6ChGlobalGain       =    0

; 0 - Mono
; 1 - Surround
; 2 - Stereo
; 3 - Surround 2
6ChDownmixType      = 1

; Use 7kHz low-pass for rear channels?
6ChLowPassFilter    = 0



; Lame defaults:

; 0-6 are alt settings, 7-22 are normal ones
LamePreset       = 5

; Available modes:
; 0 - CBR
; 1 - VBR
; 2 - ABR
LameMode         = 2

; allowed quality range: 9 (worst) -> 0 (best)
LameVBRQuality   = 3

; allowed bitrate range: 0 (32kbps) -> 13 (320kbps)
LameMinBitrate   =  0
LameMaxBitrate   = 13

; allowed bitrate range: 32kbps -> 320kbps
LameAveBitrate   = 112

; Lame channel encoding mode:
; 0 - stereo
; 1 - joint stereo
; 2 - dual channel
LameChannelMode  = 1

LameCRC          = 0
LameCopyright    = 1
LameOriginal     = 1
LamePrivate      = 0


; Vorbis defaults:

; Available modes:
; 0 - CBR
; 1 - VBR
; 2 - ABR
VorbisMode       = 1

; allowed quality range: -100 (worst) -> 1000 (best)
VorbisVBRQuality = 300

; allowed bitrate range: 0kbps -> 511kbps
VorbisMinBitrate =   0
VorbisNomBitrate = 112
VorbisMaxBitrate = 511

;multiplied by 10, range from 0 to 9990
; blank: uses default
VorbisLowpass     =

VorbisHoldLowpass = 0


; MP2enc defaults:

; Available modes:
; 0 - CBR
; 1 - VBR
MP2encMode        = 0

; allowed quality range: 9 (worst) -> 0 (best)
MP2encVBRQuality  = 3

; allowed bitrate range: 0 (32kbps) -> 13 (320kbps)
MP2encMinBitrate  = 11

; MP2enc channel encoding mode:
; 0 - stereo
; 1 - joint stereo
; 2 - dual channel
MP2encChannelMode = 0

MP2encCRC         = 1
MP2encCopyright   = 1
MP2encOriginal    = 1
MP2encPrivate     = 0

MP2encNoPadding   = 0
MP2encAncillary   = 0

MP2encPsyModel    = 2


; SSRC defaults:

UseSSRC           = 1
SSRCFrequency     = 0


; AC3enc defaults:

AC3encBitrate     = 15


; FAAC defaults:

FAACProfile       = 0
FAACBitsream      = 1
FAACMode          = 1
FAACVBRQuality    = 75
FAACBitrate       = 230
FAACLowpass       = 160
FAACTNS           = 1
FAACMS            = 1
FAACShortBlocks   = 0
FAACLowpassAuto   = 1


; End