Hallo allerseits,
in letzter Zeit erhalte ich beim Umwandeln meiner DVB-S Dateien eine Fehlermeldung und das Programm bricht ab. Beim Durchgucken der Log-Dateien habe ich folgendes gefunden :
BeSweet v1.5b26 by DSPguru.
--------------------------
Error 59: Failed to sync to payload's start position : "C:\film\Extracted_audio_1.mpa"Using hip.dll v1.19 by Myers Carpenter <myers@users.sf.net>
Using Shibatch.dll v0.24 by Naoki Shibata & DSPguru (shibatch.sourceforge.net).
Using MP2enc.dll v1.129 (23/5/2002), Engine 1.129 <http://www.cdex.n3.net>.
Logging start : 10/09/05 , 21:53:42.
C:\Programme\DVD2SVCD\BeSweet\BeSweet.exe -core( -input C:\film\Extracted_audio_1.mpa -output C:\film\Encoded_audio_1.mp2 -logfile C:\film\Encoded_audio_1.log ) -ota( -g max ) -shibatch( --rate 44100 ) -2lame( -e -b 224 -m s )
[00:00:00:000] +------- BeSweet -----
[00:00:00:000] | Input : C:\film\Extracted_audio_1.mpa
[00:00:00:000] | Output: C:\film\Encoded_audio_1.mp2
[00:00:00:000] | Floating-Point Process: Yes
[00:00:00:000] | Overall Track Gain: 1.#IOdB
[00:00:00:000] +------ Shibatch -----
[00:00:00:000] | Source Sample-Rate: 48.0KHz
[00:00:00:000] | Dest. Sample-Rate: 44.1KHz
[00:00:00:000] | Attenuation : 0.0db
[00:00:00:000] +------- MP2ENC ------
[00:00:00:000] | Bitrate method : CBR
[00:00:00:000] | MP2 bitrate : 224
[00:00:00:000] | Channels Mode : Stereo
[00:00:00:000] | Error Protection: Yes
[00:00:00:000] +---------------------
Error 32: No input-data was found (wrong substream?)
Quiting...
[00:00:00:000] Conversion Completed !
Logging ends : 10/09/05 , 21:53:42.
Währe schön, wenn mir einer von euch helfen könnte wie ich das Problem umgehe.
Blinky