0.88.18
* fixed: DXVA deinterlacing resulted in heavy flickering
* fixed: low latency mode was always activated with some media players
* fixed: smooth motion FRC: OSD incorrectly reported empty queues
* fixed: crash when OpenCL wasn't working properly
* fixed: FSE mode was sometimes activated when it shouldn't0.88.19
* fixed: using the sharpening algos sometimes produced startup crashes
* fixed: forced film mode sometimes produced crashes
* fixed: weird resolution videos resulted in black screen with some old GPUs
* optimized OSD rendering performance slightly
* when running in a debugger, keyboard hook is not set, anymore0.88.20
0.88.21
* OSD rendering back to 0.88.16 logic, except when low latency mode is active
* fixed: DXVA processing failed when video stream switched resolution
* fixed: render times weren't shown correctly
* fixed: SuperRes bigger radius values could cause artifacts
* fixed: low latency mode sometimes wasn't turned off when it should0.89.0
* added new device "screen config" settings page
* added screen masking feature
* added support for anamorphic stretch
* added new processing "zoom control" settings page
* added automatic detection of black bars with lots of sub options
* fixed: DXVA deinterlacing sometimes produced "DXVA processing failed"
* fixed: profiles: scaling factor wasn't properly reported
* increased seek "black screen protection" to 2 seconds (formerly 1)madVR v0.89.1 released
0.89.3
* NNEDI3/OpenCL now uses D3D11 interop instead of D3D9 interop
* implemented most of the various missing black bar features
* added support for device profiling
* added vertical scrollbar to "profile auto select rules" edit field
* added "smoothmotion" bool value for profile rules
* fixed: sometimes video was zoomed in way too much without any reason
* fixed: black bar detection sometimes had false positives
* fixed: black bar detection sometimes unnecessarily dropped correct detection
* fixed: DXVA processing sometimes broke when stopping & starting the graph
* fixed: sub options were active even if black bar detection was off0.89.4
* debug OSD now shows black bar, source and target rect details
* added "redraw" command so MPC-HC/MPC-BE can redraw subtitles in paused mode
* fixed: zero target rect / window size made madVR crash
* fixed: native DXVA accepted all formats, even when they weren't supported
* fixed: NNEDI3 OpenCL kernel was compiled even when using super-xbr or NEDI
* fixed: new NNEDI3 interop no longer requires win7 platform update
* fixed: sometimes NNEDI3 chroma doubling was incorrectly disabled
* fixed: crash when using NNEDI3 with old windowed mode render path
* fixed: option "if black bars change pick one zoom factor" had no effect
* fixed: two deadlock causes when switching between 576i and 1080i videos
* fixed: "keep bars visible if they contain subtitles" = "forever" didn't work0.89.5
* cleanup image borders can now optionally only crop black bar borders
* implemented "move OSD and subtitles into active video area" option
* madVR OSD now respects screen masking
* optimized OSD APIs to allow media players to respect screen masking
* optimized subtitle positioning for internal MPC-HC/MPC-BE subtitle renderer
* added APIs for media players to set zoom/position modes
* added IMadVRCommand::SendCommandInt("keyPress") support (J.River MC)
* some render code cleanup (fully removed AMD interop hack etc)
* fixed: one cause for shutdown crash with native DXVA decoding
* fixed: OSD fused different luma/chroma NNEDI3 neurons into "image"
* fixed: image enhancements "restore defaults" set LumaSharpen "clamp" wrong0.89.6
* updated AdaptiveSharpen to latest version
* added support for ISubRenderCallback3 interface
* optimized DXVA fullscreen playback performance
* fixed: freezes when closing media player, or switching to different monitor
* fixed: another DXVA related crash
* fixed: subtitle positioning was sometimes incorrect with MPC-HC/MPC-BE
* fixed: disabling desktop composition was broken
* fixed: slow switching between two h264 TV stations with identical resolution
* fixed: OSD scaling information was sometimes incorrect
* fixed: "setZoomOffsetX = -1" resulted in madVR totally stopping to work0.89.7
* added support for new XySubFilter build -> full control over positioning
* added IMadVRInfo::GetRect("seekbarRect")
* fixed: XySubFilter subtitles sometimes only showed up after resizing video
* fixed: #318: debanding sometimes caused black screen
* fixed: #344: NNEDI3 doubling + smooth motion sometimes caused black screen0.89.10
* added SuperRes "sharpness" and "use linear light" options
* optimized SuperRes performance with high "strength" values
* modified subtitle mover to not change subtitle size, anymore
* added "zoom control" option to move subtitles
* added support for LAV DVD subtitle renderer
* fixed: XySubFilter: high-res PGS with smaller-res video: wrong sub position
* fixed: crash when LAV DVD subtitle renderer asked for a flush/clear
* fixed: Smooth Motion + NNEDI3 + Bilinear could cause aliasing artifacts
* fixed: #318: debanding sometimes caused black screen (once more)0.89.11
* added SuperRes "sharpness" and "use linear light" options
* optimized SuperRes performance with high "strength" values
* modified subtitle mover to not change subtitle size, anymore
* added "zoom control" option to move subtitles
* added support for LAV DVD subtitle renderer
* fixed: XySubFilter: high-res PGS with smaller-res video: wrong sub position
* fixed: crash when LAV DVD subtitle renderer asked for a flush/clear
* fixed: Smooth Motion + NNEDI3 + Bilinear could cause aliasing artifacts
* fixed: #318: debanding sometimes caused black screen (once more)0.89.12
* added auto lens memory activation via "IP Control" for JVC & Sony projectors
* added several new profile rule script variables
* added IMadVRCommand::SendCommandDouble("setArOverride") support
* when moving subtitle, margins are now relative to video height
* fixed: memory leak introduced in v0.89.10
* fixed: Catmull-Rom was broken since v0.89.10
* fixed: potential cause for "old frame" flickering when using smooth motion
* fixed: potential cause for "old frame" flickering in new windowed/FSE modes0.89.13
* added support for rotation (0°, 90°, 180°, 270°) via key shortcut and API
* videos are automatically rotated now, if the container/splitter says so
* improved chroma quality when using DXVA on Intel (and maybe NVidia) GPUs
* improved DXVA processing performance under specific circumstances
* if DXVA is used, brightness, contrast, hue etc is applied by DXVA now
* fixed a couple of DXVA processing related bugs
* Intel/NVidia: DXVA2 image + Bilinear chroma upscaling -> DXVA chroma up
* DVD Navigator AR has now priority over decoder / splitter / bitstream AR
* updated AdaptiveSharpen to 2015-10-29 (experimental) version
* added new profile rule script variables "display" and "variableAR"
* optimized RAM consumption a bit, maybe
* added option to not resume playback after lens memory change
* fixed lens memory activation problem for Sony projectors
* fixed: "runtime" profile variable didn't work properly0.89.14
* added new "sharpen edges" algorithm
* added new "crispen edges" algorithm (tamed FineSharp)
* added new "thin edges" algorithm
* added new "enhance detail" algorithm
* removed SuperRes "radius" option (set to 0.66)
* removed SuperRes "sharpness" option (set near to 2)
* removed LumaSharpen "radius" option (set to 1.0)
* removed LumaSharpen "clamp" option (set to 0.035)
* removed "apply SuperRes first" option (set to true)
* updated AdaptiveSharpen to 2015-11-05 (experimental) version
* optimized "video size has changed" notifications to media player
* optimized aspect ratio overriding API behaviourSie haben noch kein Benutzerkonto auf unserer Seite? Registrieren Sie sich kostenlos und nehmen Sie an unserer Community teil!