Hab jetzt mal die version 1.10.07 ausprobiert, aber das gleiche ergebnis.
Aber mit dem FreeVersion von rebuilder ging es jetzt perfekt.
update mal auf Rebuilder Pro 1.10.08 !
du doch eine legale Version vom Rebuilder Pro
oder etwa nicht?:seher:
Hab jetzt mal die version 1.10.07 ausprobiert, aber das gleiche ergebnis.
Aber mit dem FreeVersion von rebuilder ging es jetzt perfekt.
update mal auf Rebuilder Pro 1.10.08 !
du doch eine legale Version vom Rebuilder Pro
oder etwa nicht?:seher:
update mal auf Rebuilder Pro 1.10.08 !
http://www.jdobbs.com/Pages/DVDRebui…ro_download.htm
ansonsten fällt mir nur das hier ein
No Sound, But It's There?
http://forum.doom9.org/showpost.php?p=875889&postcount=2
der User hatte auch Tonprobleme mit der 1.10.06 nach dem Update auf 1.10.07 ging es angeblich
v1.10.8 ist raus
ZitatAlles anzeigen
HISTORY:
September 26th, 2006 (v1.10.8)
CHANGES MADE TO PRO VERSION
- Corrected an error in the beta Editor/Viewer in which the
updates made by "Allocate Saved Space to Feature" may not
be saved when exiting.. resulting in undersizing.
- Added code to reduce the likelihood that network layer
delays might cause timing errors.
- Fixed an issue in which blanking a segment might result
erroneous bitrate values.
- Corrected an bug in which a certain sequence of starting,
stopping, and resuming the ENCODE phase could skip one or
more segments and result in "Error in UpdateIFO" due to
missing M2V file(s).
- Corrected code so that space related to unreferenced cells
that have been removed is returned to video. This could
have caused undersizing when backup up certain dics.
- Added code to help alleviate "slow closing" that seems to
happen when using AutoQMatEnc on network drives and the
resulting "Cannot open ITEM.ECL" error.
- Corrected the display of "Est Size (total)" in the beta
segment editor/viewer. Previous versions failed to account
for NAVPACKs in this value. The "DVD Output Size" display
was not affected and remains correct.
- Other minor and cosmetic changes.
gibts übrigens hier
Zitat
Einzig wenn man zwischen Cropp und AddBorders filtert (in Avisynth) , bringt das was, denn der Filter muss dann nur die echten "Filmpixel" bearbeiten und nicht schwarze Balken, ist somit schneller und vor allem effektiver, da nur Bereiche gefiltert werden die es "wert" sind.
So meine ich das ja auch
@bergh, da bist du aber auf dem Holzweg das man bei DVD > DVD nicht Croppen sollte ;D
Gerade im Bezug zum DVDRebuilder
Weil wie du ja schon sagst,
Meistens sind die schwarzen Balken gar nicht da, sondern werden "hinzudedichtet", also mach Dir keinen Kopf.
Genau darin liegt der Sinn bei 16:9 DVDs!
z.B der CCE rechnet um einiges schneller wenn er die vorhandenen schwarzen Balken nicht berechnen muss, sonder nur die eigentliche Pixelarena.
(welche dadurch auch mehr Bitrate zugute bekommt)
@Fancy Fear
Lies dir bal die Beiträge zum Thema cropp+DVDRebuilder per Suchfunktion im Forum von movie2digital durch.
http://technik.movie2digital.de/board.php?boardid=105
Da würst du vieleicht etwas besser fündig
nur kurz zu Punkt 6. --> hast du eh falsch geschrieben, also egal ;D
enick schon mal Google benutzt?
Deutscher Sprachpatch für DVDLab pro 1.25+1.3.1
DVDLab 1.6 auf deutsch
DVDlab Pro 2.1 deutsch patch
DVDlab Pro 2.1 deutsch patch
http://technik.movie2digital.de/board.php?boardid=70
zudem gibt es auch etlich deutsche Anleitungen im WWW
v1.10.7 ist raus
ZitatAlles anzeigenZitat von jdobbs
Professional Edition Version 1.10.7Below is a summary of the changes/updates associated with this version (Pro release):
- Corrected a conversion error in the SP2 beta code. This could cause several possible problems during PREPARE or ENCODE.
- Added a check that forces ConvertToYUY2() into AVS files that are destined for use in ProCoder. In previous versions deselecting this option could cause ProCoder to stop functioning properly.
- Corrected functioning of the "<" and ">" buttons in the new beta Viewer/Editor. In some countries' numeric formats the "," decimal separator wasn't being properly interpreted.
- Corrected several minor slider positioning errors in the beta Viewer/Editor.
- Corrected a ReJig sizing error.
- Corrected an error in the new beta SP2 support. The maximum bitrate value was not being properly set. Note that SP2 support continues to be considered "beta".
- Corrected a bug in the ECL generation for the beta CCE SP2 feature. Previous video for the PAL system when using SP2 could result in blank sections at the end of each video segment.
- Added settings to the SP2 ECL file that could prevent sizing problems in the event that default values were incorrect.
- Corrected ECL updating routines in the Segment Editor/Viewer for SP2 files.
- Other minor fixes/enhancements.
gibts übrigens hier
vieleicht das hier
http://forum.doom9.org/showthread.php?t=92157
ccefront
ist auch von tylo Author of D2SRoBa
ccefront is a powerful unified CLI (command line interface) for all popular versions of CCE SP (2.50, 2.66, 2.67, 2.70). It adds a number of advanced features, like predictive size OPV encoding (roba), and a flexible way of generating ECL input files through a number of command line options. It also adds a convenient way to select the bitrate indirectly by specifying the target size for each of the encoded files, and the total target size for all the input files to be encoded. Finally, normal CCE templates, file based ecl template, special AVS templates with substitution parameteters, import of matrices and chapter points from files are all supported.
VBR_passes: Bestimmt die komplette Anzahl von Durchgängen die der CCE macht, dabei wird der Analysevorgang .vaf mitgezählt.
Hier kannst du auch nachschauen was bei welcher Bitrate einzustellen ist.
runterscrollen bis zu 6. Encoder Mode:
http://technik.movie2digital.de/thread.php?thr…light=Multipass
6 Passes sind totaler Unsinn und reine Zeitverschwendung !
mehr als 3 Passes bringen keine Qualitätsverbesserung, das wurde hier im Board schon öfter diskutiert
Also stell auf 3 Passes runter und du bist in 4 Stunden fertig, da du ja wie du sagt bei 6 Passes 8 Stunden benötigst.
das geht auch ganz komfortabel mit DVDRemake, oder PGCEdit (kostenlos)
Zitat von berndy2001
nö ist noch nicht gelistet
und eine E-mail für den Download hab ich auch noch nicht bekommen :nein:
[Edit] so jetzt is er gelistet, gleich mal updaten
also mit MPEG Video Wizard (EUR 85.45) oder MPEG2VCR (USD 49.00)
beides gleicher Hersteller
http://www.womble.com/products/index.html
kannst du Framegenau und ohne Neukodierung schneiden und zusammenfügen.
Ich benutze den MPEG Video Wizard ist ein bisschen komfortabler
das geht mit DVDRemake
http://www.dimadsoft.com/dvdremakepro/index.php?lang=de
über diesen Link gibts 10 % Rabbat
http://www.deano.dsl.pipex.com/dvdremake/dvdremake.htm
[Edit]
ob Frameraten geht hmm, weiß ich nicht
aber die Kapitelzeiten kannste easy ändern
ja gibt es
lad dir hier im Forum den DVD-RB Optimizer runter
http://forum.gleitz.info/showthread.php?t=13041
da sind welche drin
Zitat von kurtwieso gibst du uns nicht die entsprechenden Auszüge und machst uns nur die Nase lang?
:zunge:
heute schon gegoogelt :seher:
und natürliche eine ordenliche Vorschau der Untertitel mit dem Video wo sie rein sollen