wie sieht es denn mit links aus, die direkt auf Seiten führen wo man den http://dvd-rb.dvd2go.org/modules.php?na…op=getit&lid=75DVD Decrypter runterladen kann?
Denn der Link von dir führt direkt dahin.
Gruß
lanius
wie sieht es denn mit links aus, die direkt auf Seiten führen wo man den http://dvd-rb.dvd2go.org/modules.php?na…op=getit&lid=75DVD Decrypter runterladen kann?
Denn der Link von dir führt direkt dahin.
Gruß
lanius
Die Pro-Version 0.91 ist raus.
ZitatAlles anzeigenChanges in this version:
- Modified the handling of Movie-Only and it's
relationship to D2V files. Also cleaned up
problems with Movie-Only and certain types of
structure protection.
- Fixed "Runtime Error 340" that could happen
when attempting to automatically change the
Movie-Only option.
- Corrected "Runtime Error 6" during REBUILD on
sources that have very large TMAP tables in
the IFO file.
- Added code to inhibit the "...is already
small enough to fit " warning when using the
"No Compression" mode.
- Made a change to OPV prediction routines that
will significantly improve output sizing on
certain types of movies.
- Removed the restriction that limited output
size to 100% of the original. There are rare
occasions in which additional processing (e.g.
frame resizing/filtering) may need additional
bandwidth that is made available through extra
reduction or movie-only modes. Generally,
though, it is best to use "No Compression" mode
on sources that would hit 100% or greater.
- Added code to include a "(DC)" to the
description of audio and/or subtitle streams if
they are flagged as director's comments. Also
added a "(F)" to subtitles that are forced.
- Corrected an error in which very rarely, under
a specific set of circumstances, a 4:3 source
(that has some portion of its stream flagged as
16:9) could incorrectly change the aspect ratio
to 16:9 in the IFO file.
- Changed the default background color to one
that is more standard. The background color
only applies to skins that have no graphic that
fills the background (like "Windows Standard").
- Corrected an error in which retail versions of
CCE 2.67 before v2.67.0.27 would set the wrong
value for "video_type" in the ECL and perform
OPV rather than multipass encoding.
Die Pro-Version 0.90 ist raus.
ZitatAlles anzeigenChanges in this version:
CHANGES MADE TO PRO VERSION ONLY
- (v0.90a) Fixed a last minute syntax error.
- Fixed an error (introduced in v0.89) in which
Movie-Only mode could fail to execute under
certain circumstances.
- Fixed a source of "Runtime Error 9" during the
encode phase when using OPV.
- Fixed "Runtime Error 5" that could happen upon
startup under certain conditions.
Die 0.14 Version war ja nicht lange auf der HP zubekommen :ani_lol: heute Morgen war sie noch da und nu schaue ich gerade nochmal auf die Page und was sehe ich :cool: sie is wieder entfernt worden.
Version 0.86
Below is a summary of the changes/updates associated with this version (Pro release, Freeware expected for release in mid May, 2005):
CHANGES MADE TO PRO VERSION ONLY
- By popular demand I have added a new Movie-Only mode. By removing all extraneous material this mode guarantees the highest possible quality reproduction of the DVD's main film.
- Modified the HC One Pass VBR prediction and parameter passing to take advantage of the new version (HCBatch, v014 or above). Hank315 has modified the new version to limit maximum bitrate. This makes it possible to use HC OPV and remain within DVD bitrate limitations. Outstanding work by Hank315. This encoder is giving CCE a run for its money.
- For experts: I've added a flag under "Resize to Half-D1" that allows for adjustment in the method of resizing. While my testing shows most sources use a "generic PAR" and will be resized directly -- there are ITU PAR sources that need to have the left/right overscan areas stripped before resizing to Half-D1. The "Adjust for ITU Aspect Ratio" flag does that. Please note that the difference is very slight and in most cases would not be noticable. An ITU PAR incorrectly size would only show a 2% horizontal aspect distortion.
CHANGES MADE TO PRO AND FREEWARE VERSIONS
- Added a fix that significantly increased the point at which the "Buffer Overflow 0003" or the "Buffer Overflow 0004" is reached. While this error is normally a result of a corrupted source, I have found at least one example in which the buffer overflowed on a legitimate source. This will correct that.
- Again changed the method of encoding for very small segments. Some reports of CCE CRC errors make it necessary to create a "workaround". Now all segments of less than 60 frames are encoded using one pass VBR in CCE SP versions. Single frames encoded with CCE Basic are done in CBR. The Pro version still retains STILLS intact.
- Changed the setting for ProCoder output so the .ECL file (using ECLPro) has "seq_endcode=1" for all encodes. Since DVD-RB now removes endcodes automatically this save time by not requiring ProCoder to do so. Thanks to Robot1.
- Modified the way DVD-RB calls web pages so it uses the default browser (it was making a call to "Explorer" before -- which always called Internet Explorer. Thanks again to Robot1.
- Added a "Contents" option to the Help Menu. This will open the default file DVD-RBHELP.CHM in the DVD-RB home direcotry if it exists.
Zitat von wodi666lanius
Und hast du mit PX demuxt?
Jap habe mit ProjektX demuxt, das macht mein JTG automatisch nach dem streamen.
Also mit Muxman habe ich meine Probleme wenn ich was über die D-Box aufnehme.
Bekomme immer Fehlermeldungen das es keine DVD konforme Struktur is und GOP Fehler.
Ich nehm da lieber DVD-Lab
Jap ich bin von Telekom DSL nach Arcor DSL gewechselt und muste lange warten bis es bei mir in der Straße möglich war Arcor zubekommen.
Arcor hatt seine eigene Leitungen .... hier und da müßen sie noch ausgebaut werde.
<- Arcor ISDN + Flatt + 3MBit
Hab meine gute alte Tasterur auch schon zich mal aauseinander genommen ...
Was man da alles wiederfindet :hm: will ich jetzt nicht zum besten geben :lol: aber danach geht wieder alles wie geschmeirt.
Zitat[font=verdana, arial, helvetica] This is a bug fix release:
1. The file list buffer was expanded to prevent crashes when many files are opened at once.
2. ESC now exits CLI mode.
3. The delay when doing Save Project on a transport stream without PAT/PMT has been decreased.
4. AVS template processing with CLI no longer crashes.[/font]
Also ich habe gerade ein update durchgeführt auf 6.30.00.10 gab keine Probleme.
BeLight 0.22 Alpha 1
-----------------------------
Changelog of the 0.22 alpha 1
-----------------------------
* Drag & Drop function.
* Batch Mode.
* Append output log file option.
* BeSweet mux file Wizard (thanks to LigH for the tip).
* Preview & Edit BeSweet Command Line are 2 options independant now.
* Some improvements concerning the design.
* Bugs fixed for AAC Presets.
* Others some bugs corrected.
ZitatAlles anzeigenDGMPGDec 1.2.1
Changes from version 1.2.0
--------------------------1. Fixed crashing bug in BlindPP().
2. Fixed incorrect DGDecode postprocessing for YUY2.
3. Changed DGDecode to deliver YV12 by default. For I420, use
DGDecode(...,i420=true). This fixes interoperability with some
applications, such as mencoder.4. Fixed erroneous audio delays for multiple tracks.
5. Added i420 parameter to DGDecode help file, and added an Appendix
on BlindPP() usage.6. Added Deblock() blind H.264 deblocking filter, by "Manao", because
some people prefer it to BlindPP().[DAG Feb 19, 2005]
[font=verdana,arial,helvetica]DGMPGDec 1.2.1 Beta 2
Zitat
Zitat
Zitat[/font][font=verdana, arial, helvetica] 1. Fixed crashing bug in BlindPP().
2. Fixed incorrect DGDecode postprocessing for YUY2.
3. Changed DGDecode to deliver YV12 by default. For I420, use
DGDecode(...,i420=true). This fixes interoperability with some
applications, such as mencoder.4. Fixed erroneous audio delays for multiple tracks.
5. Added i420 parameter to DGDecode help file, and added an Appendix
on BlindPP() usage.[/font][font=verdana,arial,helvetica]
[/font]