Hallo zusammen,
ich habe hier eine 3d BluRay rumliegen die ich mit BD3D2MK3D bearbeite.
Es ist eine MVC Spur die Enddefekt zu SBS umgewandelt wird.
Leider kann ich mit meinem Favoriten Programm Staxrip keine 3D BluRays bearbeiten.
In Staxrip ist es ziemlich einfach das Video zu schneiden. Bsp.: Filmanfang und Abspann.
Das geht mit BD3D2MK3D leider nicht da dieses Programm sämtliche Daten auf Festplatte sich holt und zum Schluss eine _ENCODE.cmd erstellt die man nurnoch doppelklicken brauch zum encoden.
Hier ein Beispiel der .cmd Datei:
@echo offset path=C:\Users\xxx\xxx\BD3D2MK3D\toolset;%path%echo Encoding _ENCODE_3D_MOVIE.avsecho Movie: Testfilm_3Decho Encoding started %date% %time%@echo on"C:\Users\xxx\xxx\BD3D2MK3D\toolset\x264.exe" ^ --crf 20 --preset medium --tune film ^ --bluray-compat --profile high --level 4.1 --open-gop --keyint 24 --slices 4 ^ --colormatrix bt709 --colorprim bt709 --transfer bt709 --b-pyramid strict ^ --vbv-bufsize 30000 --vbv-maxrate 40000 --aud ^ --frame-packing 3 --qpfile chapters_3D.qpfile --frames 127425 --fps 24000/1001 ^ --output "00001.264" "_ENCODE_3D_MOVIE.avs"@echo offecho Encoding finished %date% %time%REM Optionnaly mux the video and demuxed streams to MKV.REM Note: The mux is disabled if no streams are demuxed.if exist "_MUX_3D.cmd" cmd /c "_MUX_3D.cmd"REM Everything done: do the post-processing (Shutdown computer...)if exist "_POSTPROCESS.cmd" cmd /c "_POSTPROCESS.cmd"exit /B
und hier die .avs Datei:
# Avisynth script generated Fri Jul 31 13:22:50 CEST 2015 by BD3D2MK3D v0.69b1
# to convert "J:\BDMV\PLAYLIST\00001.mpls"
# (referencing the M2TS/SSIF files 00001)
# to 3D Side-by-Side.
# Hardcoded subtitles from file "00001.track_4613.Deu_forced.3D.sup".
# Movie title: Testfilm
#
# Source MPLS information:
# MPLS file: 00001.mpls
# Video : Und AVC, 1080p, 23.976 fps, left-eye
# Video : Und MVC, 1080p, 23.976 fps, right-eye (32 3D-Planes)
# Audio : Eng DTS-HD-Master, Multi-channel, 48 Khz
# Audio : Fra AC3, Multi-channel, 48 Khz
# Audio : Deu DTS-HD-Master, Multi-channel, 48 Khz
# Audio : Ita DTS-HD-Master, Multi-channel, 48 Khz
# Audio : Eng AC3, Stereo, 48 Khz
# Subtitle: Eng PGS, 3D-plane: 1
# Subtitle: Dan PGS, 3D-plane: 2
# Subtitle: Nld PGS, 3D-plane: 3
# Subtitle: Fin PGS, 3D-plane: 4
# Subtitle: Fra PGS, 3D-plane: 5
# Subtitle: Deu PGS, 3D-plane: 6
# Subtitle: Ita PGS, 3D-plane: 7
# Subtitle: Nor PGS, 3D-plane: 8
# Subtitle: Swe PGS, 3D-plane: 9
# Subtitle: Tur PGS, 3D-plane: 10
# Subtitle: Nld PGS, 3D-plane: 11
# Subtitle: Fra PGS, 3D-plane: 12
# Subtitle: Deu PGS, 3D-plane: 13
# Subtitle: Ita PGS, 3D-plane: 14
LoadPlugin("C:\Users\xxx\xxx\BD3D2MK3D\toolset\DGMVCDecode.dll")
#LoadPlugin("C:\User\xxx\xxx\BD3D2MK3D\toolset\FRIMSource.dll")
#LoadPlugin("C:\Users\xxx\xxx\BD3D2MK3D\toolset\VSFilter.dll")
LoadPlugin("C:\Users\xxx\xxx\BD3D2MK3D\toolset\SupTitle.dll")
# Load the two video streams (127425 frames per stream)
interleaved = DGMVCSource("00001.track_4113.264", "00001.track_4114.mvc", view = 0, frames = 127425, hw = 0)
#interleaved = FRIMSource("mvc", "00001.track_4113.264", "00001.track_4114.mvc", num_frames = 127425, cache = 2, platform = "")
# Current base view: left eye.
# The views are in the common order: AVC stream = left view, MVC stream = right view.
left = SelectEven(interleaved)
right = SelectOdd(interleaved)
# Build Side-by-Side stream
StackHorizontal(Left, Right)
AssumeFPS("ntsc_film")
# Hardcode subtitles
#VobSub("00001.track_4613.Deu_forced.3D.sub")
SupTitle("00001.track_4613.Deu_forced.3D.sup")
# Resize to 720p
BicubicResize(1280, 720)
# Return the 3D clip.
Return(last)#.Info()
Alles anzeigen
Mein Frage wäre nun was muss wo manuell eingetragen werden das ich als Bsp. den Vorspann des Filmes sowie den Abspann entfernen kann.
theoretisch müsste ich die Frames bis dahin wo ich will ja wegschneiden.
Habe aber keine Ahnung was man eintragen muss dafür und wo.
Denn die Audio sowie Untertitelspuren müssten ja mit weggeschnitten werden damit ich kein Delay im Ton und Anzeige bekomme.
Kann mir hierbei jemand helfen?