Hi @all,
Gibt es eine deutsche Anleitung zu MiniDVD Authoring Plugin für DVD2SVCD. Will in DVD2SVCD miniDVD's erstellen. Habe nähmlich Probleme damit funzt irgendwie nicht oder habe ich die englische Anleitung nicht verstanden.
cu
Hi @all,
Gibt es eine deutsche Anleitung zu MiniDVD Authoring Plugin für DVD2SVCD. Will in DVD2SVCD miniDVD's erstellen. Habe nähmlich Probleme damit funzt irgendwie nicht oder habe ich die englische Anleitung nicht verstanden.
cu
Na was funzt denn nicht? Etwas genauer Bitte.
by
Chrille
Hi Chrille,
Kriege den Plugin nicht zum laufen.
cu
Hi @all,
Will den keiner mir helfen
cu
wie schon Chrille geschrieben hat... Etwas genauer Bitte. !!!
Beschreibe doch mal deinen Weg, was Du gemacht hast. Und wo denn Fehler auftreten.
Hi @all,
Ich hab genauso wie in der Anleitung stand eingestellt
In DVD2SVCD mdvdauth Ordner erstellt und mdvdauth.zip dorthin entpackt. Dann habe in mdvdauth.ini alles angepasst und DVD2SVCD alle Paths angepasst.
und so habe ich in der mdvdauth.ini eingestellt:
[General]
; dvd2svcd: Default DVD2SVCD installation path, no trailing slash!
dvd2svcd=C:\DVD2SVCD
; Windir: Only needed if environment variable not set (rare)
; Windir=C:\WINDOWS
[mDVDAuth]
; Path to Ifoedit & Vobedit, no trailing slash!
ifoedit=C:\DVD2SVCD\IfoEdit
vobedit=C:\DVD2SVCD\VobEdit
imgtool=C:\DVD2SVCD\ImgTool
SubToSup=C:\DVD2SVCD\SubToSup
; Window Titles (CASE SENSITIVE!!!)
; It's only needed to specify the start of a window title to match
; If not present, defaulted in mdvdauth to unversioned Titles, i.e.: "VobEdit v"
; Do not use complete title in SubToSup (including version)
; because Deutch and English are different!
VobEditTitle=VobEdit
IfoEditTitle=IfoEdit
ImgToolTitle=ImgTool
VobSubTitle=Filter: VobSub
SubToSupTitle=SubToSup
; mdvdauth= 1 means minidvd. Any other value means DVD
mdvdauth=1
; Subs=1 means all subpictures using VobEdit.
; Subs=2 means all subpictures using VobSub+SubToSup.
; Subs=3 (AVI2SVCD) means external subpictures:
; Located in same folder and same name (.idx) than avi file.
; Any other value means no subs
Subs=0
; Imgs=1 means make Images. Any other value means no Image Creation
; DVD images need a NTFS file_system, if size is higher than 4 GB
Imgs=1
; CopyVideoAttr=1 means copy video IFO attr. All other value means do not copy
CopyVideoAttr=0
; Use this to increase VobEdit and IfoEdit speed, but be careful. It is a
; NON-PORTABLE value and progress windows MUST be INSIDE the screen.
; You can find your optimum value running manually VobEdit/Ifoedit and
; moving the progress window near the bottom of the screen, with only the
; upper part of the vindow visible. Then read windir\ifoedit.ini or
; windir\vobedit.ini: Y value in Settings field is the right one for you.
; If you are unsure, comment the line (a value 200 will be used, which is a safe one)
YSetting=735
[Audio]
; Path to BeSweet, if not present, DVD2SVCD\BeSweet will be used. No trailing slash!
; besweet=C:\DVD2SVCD\BeSweet
; fixcrc: Action in the case of crc errors in ac3: {ignore, fix, skip, silence}. Default:ignore
; ignore: keeps the frame as it is
; fix: keeps the frame, but changes crc to the right value
; silence: replaces the frame with a silence one
; skip: deletes the frame
fixcrc=silence
;lowrate: Audio Format for lowrates ( less than 224k): {ac3,mp2}
; ac3: Uses ac3 2/0
; mp2: Uses mpeg1 layer 2
lowrate=mp2
Alles anzeigen
und es klappt troztdem nicht.
Hoffe iht habt alle verstanden.
cu
Jep mir geht es genauso...
Kann einer vieleicht eine FAQ darüber machen wie das so funz...Big THX
[General]
DVD2SVCD=F:\Program Files\DVD2SVCD
[mDVDAuth]
;Patch to Ifoedit & Vobedit,no trailing slash!
ifoedit=F:\Program Files\ifoedit
vobedit=F:\Program Files \vobedit
imgtool=F:\Program Files\DVD2SVCD\Classic_0.90_Build4
;Windows Titles (CASE SENSITIVE!!!)
VobEditTitle=VobEdit v0.6
IfoeditTitel=Ifoedit v0.95
ImgToolTitel=ImgTool classic
;mdvdauth=1 means minidvd.Any other valume means DVD
;Subs=1 means all subpictures.Any other value means no subs
Subs=0
Imgs=1
CopyVideoAttr=0
;YSetting=730
[Audio]
;Patch to BeSweet,if not present,DVD2SVCD\BeSweet will used.Notrailing slash!
;besweet=c\Program Files\besweet1.5b15
Diese einstellung hab ich gefunden weiss aber net ob's funzt...
Wenn einer von euch es geschaft hat dann bitte eine Info.
THX
Hallo Jungs, wo ist das Problem ? Ich habe es jetzt mal mit einer DVD durchlaufen lassen.
DVD-Source = 1 Film, 1Tonspur, 1Untertitelspur
mdvdauth.ini :
[General]dvd2svcd=D:\Progs\DVDTools\DVD2SVCD[mDVDAuth]ifoedit=D:\Progs\DVDTools\Ifoeditvobedit=D:\Progs\DVDTools\Vobeditimgtool=D:\Progs\DVDTools\ImgtoolSubToSup=D:\Progs\DVDTools\SubToSupVobEditTitle=VobEditIfoEditTitle=IfoEditImgToolTitle=ImgToolVobSubTitle=Filter: VobSubSubToSupTitle=SubToSupmdvdauth=0Subs=1Imgs=0CopyVideoAttr=1YSetting=735[Audio]fixcrc=silencelowrate=mp2
Einstellungen in DVD2SVCD:
genauso wie in dieser Readme.txt beschrieben. siehe Punkt 4) Launch DVD2SVCD, following the instructions below:
dvd2svcd_log.txt :
- DVD to SVCD Conversion
- DVD2SVCD ver. 1.2.1 build 2
[B]Initializing ----------------------------------------------[/B]
- J:\TEMP_DVD\VIDEO_TS\VTS_01_0.IFO
- J:\TEMP_DVD\VIDEO_TS\VTS_01_1.vob
Initializing finished.
[B]- DVD2AVI -------------------------------------------------------[/B]
Creating DVD2AVI INI file:
- D:\Progs\DVDTools\DVD2SVCD\DVD2AVI\DVD2AVI.INI
Variable settings:
iDCT_Algorithm: 32-bit SSE MMX
Executing DVD2AVI.
Executing DVD2AVI. Commandline:
"D:\Progs\DVDTools\DVD2SVCD\DVD2AVI\DVD2AVI.exe" -CS=2 -YR=1 -EXIT -OF=[J:\TEMP_DVD\DVD2DVD\DVD2AVI_Project_file] -IF=[J:\TEMP_DVD\VIDEO_TS\VTS_01_1.vob]
Framerate: 25000
DVD2AVI processing done.
[B]- AUDIO Extraction ----------------------------------------------[/B]
Found AC3 stream id: 0x80
Filename: J:\TEMP_DVD\DVD2DVD\Extracted_audio_1.ac3
Audio1 delay: 0 ms
Framerate: 25000
Audio extraction finished.
[B]- AUDIO conversion ----------------------------------------------[/B]
Encoding Audio. Filename: J:\TEMP_DVD\DVD2DVD\Extracted_audio_1.ac3
Executing BeSweet. Commandline:
"D:\Progs\DVDTools\DVD2SVCD\mdvdauth\transcodeac3.exe" -core( -input "J:\TEMP_DVD\DVD2DVD\Extracted_audio_1.ac3" -output "J:\TEMP_DVD\DVD2DVD\Encoded_audio_1.mp2" -logfile "J:\TEMP_DVD\DVD2DVD\Encoded_audio_1.log" ) -azid( -L -3db -l 0db -c normal -s surround -g max ) -2lame( -e -b 192 -m s )
Audio conversion of J:\TEMP_DVD\DVD2DVD\Extracted_audio_1.ac3 finished.
Audio conversion finished.
[B]- Video Encoding using Cinema Craft ------------------------------[/B]
- Editing AVS script file
Executing Cinema Craft Encoder.
*****
Closing program
CCE Max Speed: 1.820
Video Encoding finished.
[B]- Converting Pictures from ES to PS -------------------------------[/B]
Saving bbMPEG settings: D:\Progs\DVDTools\DVD2SVCD\mdvdauth\default.ini
*****
[B]- Multiplexing and cutting ------------------------------------------[/B]
Saving bbMPEG settings: D:\Progs\DVDTools\DVD2SVCD\mdvdauth\default.ini
Offset in Seconds: 2
Executing bbMPEG.
Variable Settings:
Movie offset: 2 seconds
Cut point: 4346 mb
Executing RunbbMPEG. Commandline:
"D:\Progs\DVDTools\DVD2SVCD\mdvdauth\fakebbmpeg.exe" "J:\TEMP_DVD\DVD2DVD\bbMPEG_Muxed_File.mpg"
Multiplexing and cutting finished.
[B]- Determining length of audio ----------------------------------------[/B]
Analyzing:
***
Analyzing finished.
[B]- Creating CD-Images using VCDXBuild ---------------------------------[/B]
- No. of chapters to create: 2
CD image #1: CD_Image_File_CD1.bin
Executing VCDXBuild. Commandline:
"D:\Progs\DVDTools\DVD2SVCD\mdvdauth\mdvdauth.exe" --verbose --cue-file="J:\TEMP_DVD\DVD2DVD\CD_Image_File_CD1.cue" --bin-file="J:\TEMP_DVD\DVD2DVD\CD_Image_File_CD1.bin" "J:\TEMP_DVD\DVD2DVD\VCDXBU~1.XML"
****
[B]- Conversion done! ----------------------------------------------[/B]
Alles anzeigen
Fazit
Das Plugin funktioniert.
Bemerkung
Auch wenn es funktioniert, würde ich NIEEEE eine DVD so erstellen. Ich bevorzuge den manuellen , schweren Weg. Besonders bei der Analyse vom Video. Auch würde ich NIEEE am Sound "rummachen".
Frage
wo bleibt den Eurer DVD2SVCD "hängen" schaut bitte in die LOG von DVD2SVCD.
Achtet auch auf Schritt - Creating CD-Images using VCDXBuild -, denn genau da werden die UnterTitel extrahiert und mit IfoEdit eine DVD erstellt.
Gruß Eure Katjarella
Hi @all,
Jetzt klappt es.
Im mdvdauth Ordner liegen doch die mdvdauth_CD.ini und mdvdauth_dvd.ini die habe ich auch eingestellt das war auch richtig bloss man musste die umbennen in mdvdauth.ini und es klappt jetzt funztz es.
Danke an alle die versucht haben zu helfen.
Eine Frage noch erstellt DVD2SVCD den Sound als AC3 oder als MP2
Im LOG sieht man das die mp2 erstellt ich brauche nähmlich AC3.
cu
schau nochmal in die Readme...
[INDENT]3.- HOW IT WORKS
----------------
For audio processing, there are two choices, (Selected from dvd2svcd
Audio downsample boxes)
- keep the original ac3 files, fixing only the delay
- transcode to a different bitrate using BeSweet/ac3enc and fixing the delay.
- transcode from mp2/wav to ac3 BeSweet/ac3enc. [/INDENT]
Entweder in DVD2SVCD Original Audio behalten wählen oder in der mdvdauth.ini
[Audio]
;lowrate: Audio Format for lowrates ( less than 224k): {ac3,mp2}
; ac3: Uses ac3 2/0
lowrate=ac3
einstellen...
Jungs, sagt bloß ich habe jetzt so einen Test durchlaufen lassen, NUR weil Ihr die mdvdauth.ini nicht gespeichert / umbenannt habt ???
Sie haben noch kein Benutzerkonto auf unserer Seite? Registrieren Sie sich kostenlos und nehmen Sie an unserer Community teil!