Hallo liebes Forum,
nach einer Woche herumprobieren und dem durchstöbern zahlloser Anleitungen, nach dem durchforsten dieses Forum's und dem Ausprobieren von etlichen Links, die einige hier in ihren Signaturen haben, bin ich meinem Problem noch immer nicht näher gekommen.
Ich hatte einmal testweise mit einem ca. 500 MB großen Filmausschnitt eine SVCD erstellen lassen. Dies klappte problemlos.
Nun wollte ich mit DVD2SVCD an eine ganze DVD heran, und bin kläglich gescheitert. Ich weiss nicht wieso oder warum, aber immer wieder wird mir kein Image erstellt. Ich poste nun erst einmal die wichtigsten Angaben, soweit ich sie hier durch das Lesen mitbekommen habe, die Fehlermeldung ist aus dem Log weiter unten ersichtlich:
- Encoder: Cinema Craft Encoder SP Version 2.66.01.01
VBR mit 4 Durchläufen eingestellt, Safemode im DVD2SVCD ist an
- Film ist 71 min lang, Bitrate (65 - 76) bei 2 CD's a 800 MB ist zwischen
3151 - 2665 laut Anzeige, Häckchen bei min Avg ist nicht drin
Plattenplatz etc. ist auch genug vorhanden (ca. 10 GB noch frei), daran kann es nicht liegen. Habe es auch schon auf meinem großen Rechner mit einer freien 30 GB Partition versucht, es kam genau dieselbe Fehlermeldung. Es kann also definitiv nicht am Speicherplatz liegen.
Habe auch schon versucht, das Image auf einen DVD-R Rohling zu bekommen (weil das ursprünglich mein Ziel war), klappt aber mit der selben Fehlermeldung nicht (ich meine die Einstellung bei der Bitrate dvd-r).
Hier poste ich nun das Log - Fenster von DVD2SVCD, v 1.2.2 b3 :
WNASPI32.DLL 4.71.2.0
WNASPI32.DLL 4.71.2.0
WNASPI32.DLL 4.71.2.0
--------------------------------------------------------
- 13.01.2005 15:58:36
- DVD to SVCD Conversion
- DVD2SVCD ver. 1.2.2 build 3
--------------------------------------------------------
Initializing
WARNING! You seem to be using "Norton Unerase Protection" and
you want to delete the temporary files created by dvd2svcd.
This can cause DVD2SVCD problems. Even though DVD2SVCD deletes
the temporary files, Norton doesn't, therefore DVD2SVCD
might run into diskspace problems. I suggest that you stop the
"Norton Unerase Protection" Service.
- I:\-= Filme =-\-= DVDs =-\-= Dokumentationen =-\Deutschland bevor die Bomben fielen\VIDEO_TS\VTS_01_0.IFO
- I:\-= Filme =-\-= DVDs =-\-= Dokumentationen =-\Deutschland bevor die Bomben fielen\VIDEO_TS\VTS_01_1.vob
- I:\-= Filme =-\-= DVDs =-\-= Dokumentationen =-\Deutschland bevor die Bomben fielen\VIDEO_TS\VTS_01_2.vob
- I:\-= Filme =-\-= DVDs =-\-= Dokumentationen =-\Deutschland bevor die Bomben fielen\VIDEO_TS\VTS_01_3.vob
- I:\-= Filme =-\-= DVDs =-\-= Dokumentationen =-\Deutschland bevor die Bomben fielen\VIDEO_TS\VTS_01_4.vob
- I:\-= Filme =-\-= DVDs =-\-= Dokumentationen =-\Deutschland bevor die Bomben fielen\VIDEO_TS\VTS_01_5.vob
- I:\-= Filme =-\-= DVDs =-\-= Dokumentationen =-\Deutschland bevor die Bomben fielen\VIDEO_TS\VTS_01_6.vob
Initializing finished.
--------------------------------------------------------
- 13.01.2005 15:58:39
- Free on drive F: 14714.86 mb
- Internal rip
--------------------------------------------------------
Preparing vobfiles to be ripped:
- I:\-= Filme =-\-= DVDs =-\-= Dokumentationen =-\Deutschland bevor die Bomben fielen\VIDEO_TS\VTS_01_1.vob
- I:\-= Filme =-\-= DVDs =-\-= Dokumentationen =-\Deutschland bevor die Bomben fielen\VIDEO_TS\VTS_01_2.vob
- I:\-= Filme =-\-= DVDs =-\-= Dokumentationen =-\Deutschland bevor die Bomben fielen\VIDEO_TS\VTS_01_3.vob
- I:\-= Filme =-\-= DVDs =-\-= Dokumentationen =-\Deutschland bevor die Bomben fielen\VIDEO_TS\VTS_01_4.vob
- I:\-= Filme =-\-= DVDs =-\-= Dokumentationen =-\Deutschland bevor die Bomben fielen\VIDEO_TS\VTS_01_5.vob
- I:\-= Filme =-\-= DVDs =-\-= Dokumentationen =-\Deutschland bevor die Bomben fielen\VIDEO_TS\VTS_01_6.vob
Ripping: I:\-= Filme =-\-= DVDs =-\-= Dokumentationen =-\Deutschland bevor die Bomben fielen\VIDEO_TS\VTS_01_1.vob
Ripping: I:\-= Filme =-\-= DVDs =-\-= Dokumentationen =-\Deutschland bevor die Bomben fielen\VIDEO_TS\VTS_01_2.vob
Ripping: I:\-= Filme =-\-= DVDs =-\-= Dokumentationen =-\Deutschland bevor die Bomben fielen\VIDEO_TS\VTS_01_3.vob
Ripping finished. Speed: 4701
--------------------------------------------------------
- 13.01.2005 16:06:16
- DVD2AVI
--------------------------------------------------------
Creating DVD2AVI INI file:
- E:\Anwender\Nutzprogramme\DVD - Programme\DVD2SVCD\DVD2AVI\DVD2AVI.INI
Variable settings:
iDCT_Algorithm: 32-bit SSE MMX
Executing DVD2AVI.
Executing DVD2AVI. Commandline:
"E:\Anwender\Nutzprogramme\DVD - Programme\DVD2SVCD\DVD2AVI\DVD2AVI.exe" -CS=2 -YR=1 -OM=0 -EXIT -OF=[F:\Laptop Eingang\Filme\SVCD\Temp\DVD2AVI_Project_file] -IF=[F:\Laptop Eingang\Filme\SVCD\Temp\VTS_01_1.vob,F:\Laptop Eingang\Filme\SVCD\Temp\VTS_01_2.vob,F:\Laptop Eingang\Filme\SVCD\Temp\VTS_01_3.vob]
Framerate: 25000
DVD2AVI processing done.
--------------------------------------------------------
- 13.01.2005 16:10:18
- Free on drive F: 12625.48 mb
- AUDIO Extraction
--------------------------------------------------------
Found AC3 stream id: 0x80
Filename: F:\Laptop Eingang\Filme\SVCD\Temp\Extracted_audio_1.ac3
Audio1 delay: 0 ms
Audio extraction finished.
--------------------------------------------------------
- 13.01.2005 16:13:27
- Free on drive F: 12527.39 mb
- AUDIO conversion
--------------------------------------------------------
Encoding Audio. Filename: F:\Laptop Eingang\Filme\SVCD\Temp\Extracted_audio_1.ac3
Executing BeSweet. Commandline:
"E:\Anwender\Nutzprogramme\DVD - Programme\DVD2SVCD\BeSweet\BeSweet.exe" -core( -input "F:\Laptop Eingang\Filme\SVCD\Temp\Extracted_audio_1.ac3" -output "F:\LAPTOP~1\Filme\SVCD\Temp\Encoded_audio_1.mp2" -logfile "F:\LAPTOP~1\Filme\SVCD\Temp\Encoded_audio_1.log" ) -azid( -L -3db -l 0db -c normal -s surround -g max ) -2lame( -e -b 192 -m s )
Audio conversion of F:\Laptop Eingang\Filme\SVCD\Temp\Extracted_audio_1.ac3 finished.
Audio conversion finished.
--------------------------------------------------------
- 13.01.2005 16:17:51
- Free on drive F: 12429.29 mb
- Converting Pictures
--------------------------------------------------------
Converting: E:\Anwender\Nutzprogramme\DVD - Programme\DVD2SVCD\DefaultTitlepicture.bmp
Converting: E:\Anwender\Nutzprogramme\DVD - Programme\DVD2SVCD\DefaultChangeCD.bmp
Converting: E:\Anwender\Nutzprogramme\DVD - Programme\DVD2SVCD\DefaultLastCD.bmp
Finished converting pictures
--------------------------------------------------------
- 13.01.2005 16:18:04
- Free on drive F: 12428.15 mb
- Video Encoding using Cinema Craft
--------------------------------------------------------
Executing Frameserver.
Closing program
Executing Cinema Craft Encoder.
StreamSectors: 1663691176
AudioSectors: 104440560
VideoPAPO: 24153624
ScanOffsetBytes: 128568
SeqAligningBytes: 8171211
DVDBytes: 0
VideoEndHeader: 8
SubtitleSectors: 0
EmptySectors: 238.00
PictureSectors: 900.00
PureMPEGStream: 1526797205.33
Seconds: 4293.60
CalcMPEGStream: 1526797205.33
Frames: 107140
CDSize: 800.00
Number of CDs: 2
Cut point 795.00
Variable Settings:
Frames: 107140
Anti Noise Filter: Off
Passes: 4
Image Quality: 20
VAF file creation: On
Video Encoding Mode: Multipass VBR
Min. bitrate: 300
Max. bitrate: 2530
Avg. Bitrate: 2230
Aspect Ratio: 4:3 (No borders, encoded as 4:3)
---AVS Begin---
LoadPlugin("E:\Anwender\NUTZPR~1\DVD-PR~1\DVD2SVCD\AVISYN~1.5PL\Mpeg2dec\MPEG2D~1.DLL")
MPEG2Source("F:\LAPTOP~1\Filme\SVCD\Temp\DVD2AV~1.D2V")
Import("E:\Anwender\Nutzprogramme\DVD - Programme\DVD2SVCD\Tylo\RoBaConditional.avs")
BicubicResize(480,576,0.0,0.6)
ConvertToYUY2()
----AVS End----
Closing program
CCE Max Speed: 0.000
Video Encoding finished.
--------------------------------------------------------
- 13.01.2005 17:10:24
- Free on drive F: 10551.05 mb
- Converting Pictures from ES to PS
--------------------------------------------------------
Saving bbMPEG settings: E:\Anwender\Nutzprogramme\DVD - Programme\DVD2SVCD\bbMPEG\default.ini
Executing RunbbMPEG. Commandline:
"E:\Anwender\Nutzprogramme\DVD - Programme\DVD2SVCD\bbMPEG\RunbbMPEG.exe" "F:\Laptop Eingang\Filme\SVCD\Temp\TitlePicture.bmp.mpg"
--------------------------------------------------------
- 13.01.2005 17:10:40
- Free on drive F: 10551.01 mb
- Converting Pictures from ES to PS
--------------------------------------------------------
Saving bbMPEG settings: E:\Anwender\Nutzprogramme\DVD - Programme\DVD2SVCD\bbMPEG\default.ini
Executing RunbbMPEG. Commandline:
"E:\Anwender\Nutzprogramme\DVD - Programme\DVD2SVCD\bbMPEG\RunbbMPEG.exe" "F:\Laptop Eingang\Filme\SVCD\Temp\ChangeCDPicture.bmp.mpg"
--------------------------------------------------------
- 13.01.2005 17:10:44
- Free on drive F: 10550.97 mb
- Converting Pictures from ES to PS
--------------------------------------------------------
Saving bbMPEG settings: E:\Anwender\Nutzprogramme\DVD - Programme\DVD2SVCD\bbMPEG\default.ini
Executing RunbbMPEG. Commandline:
"E:\Anwender\Nutzprogramme\DVD - Programme\DVD2SVCD\bbMPEG\RunbbMPEG.exe" "F:\Laptop Eingang\Filme\SVCD\Temp\LastCDPicture.bmp.mpg"
--------------------------------------------------------
- 13.01.2005 17:10:48
- Free on drive F: 10550.93 mb
- Multiplexing and cutting
--------------------------------------------------------
Saving bbMPEG settings: E:\Anwender\Nutzprogramme\DVD - Programme\DVD2SVCD\bbMPEG\default.ini
Offset in Seconds: 1
Executing bbMPEG.
Variable Settings:
Movie offset: 1 seconds
Cut point: 795 mb
Executing RunbbMPEG. Commandline:
"E:\Anwender\Nutzprogramme\DVD - Programme\DVD2SVCD\bbMPEG\RunbbMPEG.exe" "F:\Laptop Eingang\Filme\SVCD\Temp\bbMPEG_Muxed_File.mpg"
Length of F:\Laptop Eingang\Filme\SVCD\Temp\bbMPEG_Muxed_File00.mpg
1737 Seconds
Offset in Seconds: 1738
Executing bbMPEG.
Variable Settings:
Movie offset: 1 seconds
Cut point: 795 mb
Executing RunbbMPEG. Commandline:
"E:\Anwender\Nutzprogramme\DVD - Programme\DVD2SVCD\bbMPEG\RunbbMPEG.exe" "F:\Laptop Eingang\Filme\SVCD\Temp\bbMPEG_Muxed_File.mpg"
Multiplexing and cutting finished.
--------------------------------------------------------
- 13.01.2005 17:35:30
- Free on drive F: 8571.68 mb
- Determining length of audio
--------------------------------------------------------
Analyzing: F:\Laptop Eingang\Filme\SVCD\Temp\bbMPEG_Muxed_File00.mpg
1739.928 seconds F:\Laptop Eingang\Filme\SVCD\Temp\bbMPEG_Muxed_File00.mpg
Analyzing: F:\Laptop Eingang\Filme\SVCD\Temp\bbMPEG_Muxed_File01.mpg
2547.696 seconds F:\Laptop Eingang\Filme\SVCD\Temp\bbMPEG_Muxed_File01.mpg
Analyzing finished.
--------------------------------------------------------
- 13.01.2005 17:37:58
- Free on drive F: 8571.68 mb
- Creating CD-Images using VCDXBuild
--------------------------------------------------------
- No. of chapters to create: 7
CD image #1: CD_Image_File_CD1.bin
Executing VCDXBuild. Commandline:
"E:\Anwender\Nutzprogramme\DVD - Programme\DVD2SVCD\VCDImager\VCDXBuild.exe" --verbose --cue-file="F:\LAPTOP~1\Filme\SVCD\Temp\CD_Image_File_CD1.cue" --bin-file="F:\LAPTOP~1\Filme\SVCD\Temp\CD_Image_File_CD1.bin" "F:\LAPTOP~1\Filme\SVCD\Temp\VCDXBU~1.XML"
--------------------------------------------------------
- 13.01.2005 17:42:10
- Free on drive F: 8560.22 mb
- Creating CD-Images using VCDXBuild
--------------------------------------------------------
- No. of chapters to create: 10
CD image #2: CD_Image_File_CD2.bin
Executing VCDXBuild. Commandline:
"E:\Anwender\Nutzprogramme\DVD - Programme\DVD2SVCD\VCDImager\VCDXBuild.exe" --verbose --cue-file="F:\LAPTOP~1\Filme\SVCD\Temp\CD_Image_File_CD2.cue" --bin-file="F:\LAPTOP~1\Filme\SVCD\Temp\CD_Image_File_CD2.bin" "F:\LAPTOP~1\Filme\SVCD\Temp\VCDXBU~2.XML"
VCDXBuild failed to create a bin/cue file!
Und hier noch aus der log-Datei des VCDX Built:
--DEBUG: EEL sysid=[F:\LAPTOP~1\Filme\SVCD\Temp\VCDXBU~1.XML] pubid=[(null)]
--DEBUG: EEL sysid=[http://www.gnu.org/software/vcdimager/videocd.dtd] pubid=[-//GNU//DTD VideoCD//EN]
++ WARN: initializing libvcd 0.7.12 [cygwin/i686]
++ WARN:
++ WARN: this is the UNSTABLE development branch!
++ WARN: use only if you know what you are doing
++ WARN: see http://www.hvrlab.org/~hvr/vcdimager/ for more information
++ WARN:
++ WARN: Album ID too long, will be truncated
--DEBUG: changed album id to `DEUTSCHLAND_BEVO'
--DEBUG: changed volume number to 1
--DEBUG: changed volume count to 2
--DEBUG: changed restriction number to 0
--DEBUG: changing 'next volume use sequence 2' to 0
--DEBUG: changing 'next volume use lid 2' to 0
++ WARN: !! enabling deprecated VCD3.0 ENTRYSVD signature -- SVCD will not be IEC62107 compliant !!
--DEBUG: changing 'relaxed aps' to 0
--DEBUG: changing 'update scan offsets' to 0
--DEBUG: adding pbc (chapter-00/2)
--DEBUG: adding pbc (chapter-01/2)
--DEBUG: adding pbc (chapter-02/2)
--DEBUG: adding pbc (chapter-03/2)
--DEBUG: adding pbc (chapter-04/2)
--DEBUG: adding pbc (chapter-05/2)
--DEBUG: adding pbc (chapter-06/2)
--DEBUG: adding pbc (chapter-07/2)
--DEBUG: adding pbc (ChangeCD/2)
--DEBUG: adding pbc (end/3)
--DEBUG: adding segment #0, F:\LAPTOP~1\Filme\SVCD\Temp\TITLEP~1.MPG
--DEBUG: pts start offset 0.220000 (max pts = 0.260000)
--DEBUG: playing time 0.040000
INFO: scanning mpeg segment item #0 for scanpoints...
--DEBUG: already scanned... not rescanning
--DEBUG: SPI length is 13 sector(s), allocated 1 segment(s)
--DEBUG: adding segment #1, F:\LAPTOP~1\Filme\SVCD\Temp\CHANGE~1.MPG
--DEBUG: pts start offset 0.220000 (max pts = 0.260000)
--DEBUG: playing time 0.040000
INFO: scanning mpeg segment item #1 for scanpoints...
--DEBUG: already scanned... not rescanning
--DEBUG: SPI length is 13 sector(s), allocated 1 segment(s)
--DEBUG: sequence count 1
--DEBUG: adding sequence #0, F:\LAPTOP~1\Filme\SVCD\Temp\BBMPEG~1.MPG
--DEBUG: pts start offset 0.220000 (max pts = 1740.100000)
--DEBUG: playing time 1739.880000
INFO: scanning mpeg sequence item #0 for scanpoints...
--DEBUG: already scanned... not rescanning
++ WARN: audio stream #0 has sampling frequency 48000 Hz (should be 44100 Hz)
--DEBUG: pbc: psd size 728 (extended psd 0)
--DEBUG: iso9660: highest alloced sector is 536 (using 537 as isosize)
--DEBUG: requested entry point (id=entry-chapt-02) at 24.710000, closest possible entry point at 24.800000
--DEBUG: requested entry point (id=entry-chapt-03) at 298.750000, closest possible entry point at 298.840000
--DEBUG: requested entry point (id=entry-chapt-04) at 598.790000, closest possible entry point at 598.880000
--DEBUG: requested entry point (id=entry-chapt-05) at 898.830000, closest possible entry point at 898.920000
--DEBUG: requested entry point (id=entry-chapt-06) at 1198.870000, closest possible entry point at 1198.960000
--DEBUG: requested entry point (id=entry-chapt-07) at 1498.910000, closest possible entry point at 1499.000000
++ WARN: generated image (359176 sectors [79:49.01]) may not fit on 74min CDRs (333000 sectors)
--DEBUG: OGT streams available: 0 0 0 0
--DEBUG: OGT streams available: 0 0 0 0
++ WARN: setting ENTRYSVD signature for *DEPRECATED* VCD 3.0 type SVCD
--DEBUG: OGT streams available: 0 0 0 0
INFO: writing track 1 (ISO9660)...
--DEBUG: setting EOR for SeqEnd at packet# 11 ('segment-titlepicture')
--DEBUG: setting EOR for SeqEnd at packet# 11 ('segment-changecd')
INFO: writing file `EXTRA/DVD2SVCD.XML' (6813 bytes)
INFO: writing file `EXTRA/SVCDINFO.TXT' (2297 bytes)
INFO: writing track 2, MPEG2, PAL 2/3 D-1 (480x576/25fps), audio[0]: l2/48.0kHz/192kbps/stereo ...
--DEBUG: MPEG packet statistics: 340126 video, 18212 audio, 0 zero, 0 ogt, 1 unknown
--DEBUG: writting post-gap ('leadout pregap')...
INFO: finished ok, image created with 359176 sectors [79:49.01]
**************************************************************
--DEBUG: EEL sysid=[F:\LAPTOP~1\Filme\SVCD\Temp\VCDXBU~2.XML] pubid=[(null)]
--DEBUG: EEL sysid=[http://www.gnu.org/software/vcdimager/videocd.dtd] pubid=[-//GNU//DTD VideoCD//EN]
++ WARN: initializing libvcd 0.7.12 [cygwin/i686]
++ WARN:
++ WARN: this is the UNSTABLE development branch!
++ WARN: use only if you know what you are doing
++ WARN: see http://www.hvrlab.org/~hvr/vcdimager/ for more information
++ WARN:
++ WARN: Album ID too long, will be truncated
--DEBUG: changed album id to `DEUTSCHLAND_BEVO'
--DEBUG: changed volume number to 2
--DEBUG: changed volume count to 2
--DEBUG: changed restriction number to 0
--DEBUG: changing 'next volume use sequence 2' to 0
--DEBUG: changing 'next volume use lid 2' to 0
++ WARN: !! enabling deprecated VCD3.0 ENTRYSVD signature -- SVCD will not be IEC62107 compliant !!
--DEBUG: changing 'relaxed aps' to 0
--DEBUG: changing 'update scan offsets' to 0
--DEBUG: adding pbc (chapter-01/2)
--DEBUG: adding pbc (chapter-02/2)
--DEBUG: adding pbc (chapter-03/2)
--DEBUG: adding pbc (chapter-04/2)
--DEBUG: adding pbc (chapter-05/2)
--DEBUG: adding pbc (chapter-06/2)
--DEBUG: adding pbc (chapter-07/2)
--DEBUG: adding pbc (chapter-08/2)
--DEBUG: adding pbc (chapter-09/2)
--DEBUG: adding pbc (chapter-10/2)
--DEBUG: adding pbc (LastCD/2)
--DEBUG: adding pbc (end/3)
--DEBUG: adding segment #0, F:\LAPTOP~1\Filme\SVCD\Temp\LASTCD~1.MPG
--DEBUG: pts start offset 0.220000 (max pts = 0.260000)
--DEBUG: playing time 0.040000
INFO: scanning mpeg segment item #0 for scanpoints...
--DEBUG: already scanned... not rescanning
--DEBUG: SPI length is 13 sector(s), allocated 1 segment(s)
--DEBUG: sequence count 1
--DEBUG: adding sequence #0, F:\LAPTOP~1\Filme\SVCD\Temp\BBMPEG~2.MPG
++ WARN: mpeg user scan data: one or more BCD fields out of range for 'forward_I_offset ': [a0:00.64]
++ WARN: mpeg user scan data: one or more BCD fields out of range for 'forward_I_offset ': [a0:03.02]
++ WARN: mpeg user scan data: one or more BCD fields out of range for 'forward_I_offset ': [a0:05.26]
++ WARN: mpeg user scan data: one or more BCD fields out of range for 'forward_I_offset ': [a0:07.45]
++ WARN: mpeg user scan data: one or more BCD fields out of range for 'forward_I_offset ': [a0:09.65]
++ WARN: mpeg user scan data: one or more BCD fields out of range for 'forward_I_offset ': [a0:12.11]
++ WARN: mpeg user scan data: one or more BCD fields out of range for 'forward_I_offset ': [a0:14.32]
++ WARN: mpeg user scan data: one or more BCD fields out of range for 'forward_I_offset ': [a0:16.58]
++ WARN: mpeg user scan data: from now on, scan information data errors will not be reported anymore---consider enabling the 'update scan offsets' option, if it is not enabled already!
--DEBUG: pts start offset 0.220000 (max pts = 2547.852000)
--DEBUG: playing time 2547.632000
INFO: scanning mpeg sequence item #0 for scanpoints...
--DEBUG: already scanned... not rescanning
++ WARN: audio stream #0 has sampling frequency 48000 Hz (should be 44100 Hz)
--DEBUG: pbc: psd size 1064 (extended psd 0)
--DEBUG: iso9660: highest alloced sector is 389 (using 390 as isosize)
--DEBUG: requested entry point (id=entry-chapt-02) at 62.020000, closest possible entry point at 62.120000
--DEBUG: requested entry point (id=entry-chapt-03) at 361.540000, closest possible entry point at 361.640000
--DEBUG: requested entry point (id=entry-chapt-04) at 661.580000, closest possible entry point at 661.680000
--DEBUG: requested entry point (id=entry-chapt-05) at 961.620000, closest possible entry point at 961.720000
--DEBUG: requested entry point (id=entry-chapt-06) at 1261.660000, closest possible entry point at 1261.760000
--DEBUG: requested entry point (id=entry-chapt-07) at 1561.700000, closest possible entry point at 1561.800000
--DEBUG: requested entry point (id=entry-chapt-08) at 1861.740000, closest possible entry point at 1861.840000
--DEBUG: requested entry point (id=entry-chapt-09) at 2161.780000, closest possible entry point at 2161.880000
--DEBUG: requested entry point (id=entry-chapt-10) at 2461.820000, closest possible entry point at 2461.920000
**ERROR: image too big (535363 sectors > 449850 sectors)
Es ist ganz schön viel zu lesen, aber ich komme von selbst nicht auf die Lösung meines Problems. Vielen Dank schon mal im Voraus für all diejenigen, welche sich die Mühe machen. Bin für jeden Tipp dankbar !
Falls ergänzende Angaben zur Problemlösung notwendig sind teilt mir dies bitte mit, ich schaue mehrmals nach meinem Thread und antworte so schnell wie möglich.
mit freundlichen Grüssen
FunThomas