[font=verdana, arial, helvetica] VERSION HISTORY
1.05 beta
- second audio can be set explicitely to a given type in non-auto modes
- autosplit works correctly with two audio streams
- interlaced detection threshold raised to 2% (to avoid unnecessary deinterlacing)
- updated documentation
- added support for XviD 1.0 which is automatically detected
das ist doch mal nett
grüzi Sill
Edit: ach ja, der Link:
[/font][font=verdana, arial, helvetica]Beta release (1.0 has to be installed) 1.05:
Primary mirror: http://len0xmirror1.serveftp.net/~l...beta.Update.exe
Secondary mirror: http://len0x.btothec.com/AutoGordia...beta.Update.exe
Backup mirror: http://len0x.leffe.dnsalias.com/Aut...beta.Update.exe[/font]
Auto Gordian Knot - aktuelle Version
-
-
nachdem am 24.05.04 Auto Gordian Knot v1.25 erschienen ist, heute nun ein nettes Update...
[font=verdana,arial,helvetica]version 1.30 beta
http://len0x.btothec.com/AutoGordianKno…beta.Update.exe
[/font][font=verdana, arial, helvetica] Change log (bigger than ever):
- DUE TO MISUSE OF AUTOGK WITH UNSUPPORTED RIPPING TOOLS, IT'S NO LONGER ABLE TO PARSE IFO FILES, SO ONLY DVDDECRYPTER IN IFO MODE CAN BE USED FROM NOW ON
- AutoGK works now with DGMPGDec 1.0.9
- removed test for alternative field order for PAL sources
- video type and AR is taken from D2V file now
- added support for direct opening of MPEG2 files (VOB/M2V/MPG/MPEG). Enabled by CTRL-F12
- fixed problem of cutting off last few seconds of video during splitting
- installer fixes AVI file association to prevent "Error opening AVI" after comp test
- added option to rip all subtitle streams (only when using external subs)
- message "WinRar is not found" is no longer displayed when internal subs are used
- improved parsing of stream info file
- comp test limit is reduced to 65% for XviD 1.0 (resulting in higher resolution output)
- added more debug info into logs
- indexing/demuxing step has now timeout of 30 min after which job will be aborted to allow the queue to proceed
- subtitle splitting step has now timeout of 5 min after which job will proceed anyway
- bitrate for mono encoding is now always half of the bitrate set on advanced options window
- resizing algorithm changed heavily to accomodate upcoming support for different input sources (ITU standard is no longer applied)
- field order, aspect ratio and resolution is now taken during encoding from D2V file
- possible width is increased to 1920
- max quality and target quality modes are using source input width and not predefined width of 720/704
[/font]
dat is doch mal nett, oder ?!
P.S.: kann mal jemand bitte das "v1.05 beta" aus dem Threadtitel entfernen und nur noch den Namen stehen lassen - danke. Ich hab's versucht aber bin gescheitert... Ey, bin ich Mod oda was -
Themen-Optionen - Thema bearbeiten ... darfst du nicht?
-
http://len0xmirror1.serveftp.net/~len0x/AutoGor…beta.Update.exe
Der Link funktioniert zumindest bei mir, obiger nicht.
Ist nach eigener Aussage von len0x aber noch mehr Alpha als Beta...
Hier der Thread dazu: http://forum.doom9.org/showthread.php…5541#post505541
mfg
ylfcam -
Version 1.79 beta
[font=verdana, arial, helvetica] - improved handling of DTS and PCM audio tracks
- minimum and maximum width settings are respected during adjustments after first pass[/font] -
[font=verdana, arial, helvetica] 1.82 beta
- 2Gb predefined target size is reduced to accomodate oversize (now its 2040 Mb)
- fixed a bug when custom target size resets itself during minimize/restore action
- fixed a bug when AutoGK cannot write registry settings after a codec was just reinstalled[/font] -
[font=verdana, arial, helvetica] 1.83 beta
- added support for LPCM audio tracks in file mode (by adding new DGIndex)
- added link to FAQ on info window
- lame_enc.dll updated to version 3.96.1[/font] -
[font=verdana, arial, helvetica] 1.84 beta
- fixed subtitles position for half-D1 DVD sources
- debug mode shows complete vcf scripts in the logs
- bundled with XviD 1.0.3 [/font] -
[font=verdana, arial, helvetica] 1.86 beta
- added audio detection for the file mode (no more 'Unknown Audio')
- better handling of PCM audio streams in mpeg/vob files
- video PID is displayed in AutoGK upon loading of a transport stream
- ".audio_id" hidden option is removed (as audio should be properly detected in file mode now)
- AutoGK Asisstant is integrated into AutoGK (still via CTRL-F9)
- minor GUI fixes
- lame_enc.dll is downgraded back due to problems with mono encoding[/font] -
1.87 beta
- fixed some bugs on new hidden option window
- shortcut CTRL-F10 is removed
- for PCM/MPA audio tracks in auto audio mode default bitrate for > 1CD rips is 192kbps now
- BeSweet is replaced by azid/normalize/lame(3.96.1) combo (lots of testing required)
- minimum bitrate for both CBR and VBR modes is lowered to 32kbps
- removed timeout for demuxing operation -
1.88 beta
Updating small bits and pieces. Change log:- intermediate WAV file is deleted after MP3 encoding
- DGMPGDec updated to version 1.1.0
- check for updates improved to detect stable/beta versions (new option will come for stable release) -
-----------------------
Version 1.89 beta is out
A couple of old bugs fixed, improved handling of TS sources and minor cosmetic changes. Full change log:
- fixed audio detection for some configurations in file mode
- AutoGK respects max resolution settings after change of matrix during resizing step
- some new icons (should look OK on non-WinXP systems)
- improved PIDs detection for transport streams
- remove .tstream hidden option
- added .aspect hidden option to override 16:9 vs 4:3 input AR
- input dir (or its parent) are persistent for different AutoGK runs -
1.93 beta
- speedup of denoising for SSE2 & SSE3 capable CPUs (via different versions of RemoveGrain.dll)
- Reduced chance of oversized XviD encode in some cases
- min quantizer is reduced to 1 if undersize of XviD encode is expected
- encoding is aborted after first pass if number of frames was very different from expected (to prevent wasting time during second pass after first pass crashed)
- DGIndex updated to version 1.2.1
- ColorMatrix.dll is updated to version 1.9 -
Stable AutoGK 1.95 is out
- updated tutorial
- new option in the installer to check updates only for stable versions
- auto complete of AVI file name in SaveAs dialog (uses input dir name as the name of avi file)
- minor GUI changes
- demuxed MPA tracks are no longer deleted after audio encoding
- min quality of credits that can be set is now 1%ZitatThis release does contain a separate responsetarget advertizing software (see disclaimer in the installer) as was introduced in latest betas. Search the development forum for more info - it was extensively discussed there.
-
2.00 beta is out
ZitatAs promised here is first version with AVI input support, plus initial support of new DIVX media format (lets see if it becomes useful). Enjoy.
-
Version 2.01 beta is out
ZitatOn the way of improving AVI input support. Change log:
- added support for RGB codecs in input AVIs
- added support for manual AR settings for AVI input sources
- fixed procesing of 24fps AVI sources in some cases
- improved duration detection for AVI input sources
- added ability to select 1:1 PAR in hidden options to allow anamorphic encoding -
Version 2.02 beta is out
ZitatOn the way to improving AVI input support. Change log:
- improved accuracy of duration detection for AVI input sources
- fixed duration detection for AVI input sources with wrong AVI header
- forced 4:3 output resolution autodetection is improved and moved to hidden options
- 1:1 AR in hidden options changed to 'Original' to allow proper anamorphic encoding
- fixed a bug when the same subs were put in all current jobs after a preview with subs -
Version 2.05 beta is out
XviD 1.1 beta is finally stable enough to start using it. Also I reworked quite a bit of code in this version, so it is really beta. Change log:
- XviD 1.1 beta 2 is bundled (should be quite stable by now)
- fixed few minor bugs in the log
- M2V input is supported again
- disabled support for DIVX media format for the time being
- DGIndex updated to 1.3.0 beta 5
- audio and subtitles handling code is re-written to make it more flexible (for future versions)
- transport streams with multiple video streams can be processed again -
Version 2.06 beta is out
Release newsThis can be considered as more stable version. Change log:
- removed Maximum Quality mode (use 100% quality instead)
- DV sources can no longer be detected as hybrid
- hybrid AVI input sources can be processed now
- fixed bug when other than first stream of subs could not be displayed (introduced in 2.05)
- "All subtitles" option works again (broken in 2.05)
- XviD 1.1 beta build from 10/04/05 is bundled (may solve the problem with having "bitrate spikes control" option on without ESS support) -
Version 2.07 beta is out
Handful of minor bugfixes. Change log:
- fixed bug when color correction was used on AVI input sources
- XviD installer repackaged to solve install problems on Win9x
- added support for DTS audio in input AVI sources
- fixed bug when 4:3 AR detection was not working properly
- second audio in auto mode is VBR MP3 again -
Jetzt mitmachen!
Sie haben noch kein Benutzerkonto auf unserer Seite? Registrieren Sie sich kostenlos und nehmen Sie an unserer Community teil!